Safelincs are happy to announce the introduction of a new range of smoke and heat alarms. The new UltraFire battery-powered devices feature radio-frequency (RF) interlinking, which allows them to communicate without the need of wiring, making the installation quick and easy.
With the alarms “talking to each other” you will be alerted of an alarm activating through all connected units in the system going off: a fire detected in the kitchen by the heat alarm will alert you in your bedroom by sounding the smoke alarm installed there.
The digital “house-coding” process is simple to perform and prevents interference from other radio and electronic devices in the vicinity. Safelincs staff have been trained to further assist customers, offering to pre-connect alarms prior to dispatch, meaning that customers can simply fit the units upon delivery and then test that the units can all “communicate”, making the installation fast and efficient.
The new range includes a battery-operated heat alarm, suitable for kitchens, garages and loft areas, along with an optical smoke alarm designed for use in hallways, living rooms, on landings and in bedrooms, etc.
We work closely with industry leading manufacturers and designers in fire safety in order to offer customers the best products on the market. Our UltraFire range of quality products, such as fire extinguishers, smoke alarms, site alarms, extinguisher stands, extinguisher cabinets and mobile site points is backed by years of experience and customer feedback. It is supported by our exceptional customer service and long warranties.
Order your UltraFire RF smoke and heat alarms online or call our friendly customer service team on 0800 612 6537.
As well as testing your smoke and heat alarms on a regular basis, it is important to make a note of when the units actually need to be replaced. Studies have shown that the functionality of smoke and heat alarms can start to deteriorate when they reach a lifespan of 10 years. Each smoke and heat alarm should have a “replace by date” visible on the outside of the unit and we recommend that you adhere to this guideline.
When replacing a smoke alarm it can be quite difficult to recognise a suitable replacement product. In some cases, you may find that the current alarm model has been discontinued. With battery operated alarms, as there is no wiring in place, it is much easier to replace the unit for another smoke alarm with like-for-like features. Mains powered alarms are hard wired and are most likely interconnected during installation. It is because of this that finding replacement detectors can be difficult.
Working with Kidde Safety Europe, Safelincs are able to provide a list of mains powered discontinued Kidde smoke and heat alarms, along with their suitable product equivalents.
The new alarms will interlink with other, still working units of the previously installed smoke alarms. This means that there is no need to replace all of the units within a system if only some of the installed detectors have reached the end of their recommended lifespan. All new mains powered smoke and heat alarms are provided with a mounting bracket and a wiring connector. It is important to note that you need to replace the existing mounting base and re-connect the wiring to fit the new units. With any mains powered alarms, all electrical work should be carried out by a qualified electrician.
Safelincs offer a smoke alarm reminder service which allows customers to be notified when their smoke and heat alarms are due to be replaced, when the batteries need to be changed and reminds customers to test their alarms on a regular basis. The service is completely free and customers can choose if they wish to be reminded by email, SMS text message or by Twitter.