OPEN 7 DAYS A WEEK 0800 612 6537 Lines open today 8am - 8pm

Mains Powered Radio-Interlink 3 Smoke Alarms and 1 Heat Alarm Kit with Alkaline Back-up Battery - Aico Ei140RF Series

Write a review
Save 8%
£327.35 inc VAT
£272.79 ex VAT
Product Overview

This Ei140RF bundle containing three smoke alarms and one heat alarm, is ideal for a home installation. All alarms are mains powered with an alkaline battery backup, to ensure that your home is protected even in the event of a mains power failure. The radio frequency bases allow for up to 12 compatible alarms to be interlinked with no additional cabling required between them, up to a range of 30m indoors. Easy testing maintenance with a combined test and hush button and clear LEDs to show interlink and power supply are fully operational.

  • Ideal for installation throughout your home
    • Smoke Alarms: Hallways, landings, bedrooms and living areas
    • Heat Alarms: Kitchens, garages, unoccupied loft spaces
  • Suitable for installations complying to BS 5839-6: 2019 Grade D2
  • Power: 230V mains powered with alkaline back-up battery
  • Back-up Battery: 9V alkaline battery (included)
  • Warranty: 5 year warranty
  • Kitemarked and CE marked:
  • Each unit consists of an Ei168RC radio-frequency base and an Ei140 series alarm sensor
  • Both alarm and base plate contains a back-up battery in case of mains power failure
  • Built-in RadioLINK repeater allows the RF signal to work around obstructions and transmit up to 30m indoors
  • Radio-interlink up to 12 compatible devices
  • Combined test/hush button for easy weekly testing
  • LED indicators on the base and alarm to show interlink and power supply are operational
  • Expand your system with additional mains powered Aico alarms:
    • 2 smoke alarms and 1 heat alarm kit, with alkaline back-up battery
    • 2 smoke alarms and 1 heat alarm kit, with lithium back-up battery
    • 3 smoke alarms and 1 heat alarm kit, with lithium back-up battery
  • This alarm is also suitable for both the Welsh and Scottish updated 2022 legislation

Please Note: These units use the radio-interlink frequency 868.499MHz. This bandwidth is restricted for safety products, therfore the chances of interference should be limited.

Interlink

The table below shows all the units that can interlink with the EI140 Series.

Smoke and Heat Alarms - Radio

Model Number
Type of Unit
Type of Interlink
Ei3014 / Ei3014RF Mains Powered Heat Alarm - Sealed Lithium Hardwire or Radio Interlink
Ei3016 / Ei3016RF Mains Powered Optical Smoke Alarm - Sealed Lithium Hardwire or Radio Interlink
Ei3024 / Ei3024RF Mains Powered Optical & Heat Alarm - Sealed Lithium Hardwire or Radio Interlink
Ei3028 / Ei3028RF Mains Powered Heat & Carbon Monoxide Alarm - Sealed Lithium Hardwire or Radio Interlink
Ei2110e / Ei2110eRF Mains Powered Multi Sensor Smoke & Heat Alarm - Sealed Lithium Hardwire or Radio Interlink
Ei161e / Ei161eRF Mains Powered Ionisation Smoke Alarm - Sealed Lithium Hardwire or Radio Interlink
Ei164e / Ei164eRF Mains Powered Heat Alarm - Sealed Lithium Hardwire or Radio Interlink
Ei166e / Ei166eRF Mains Powered Optical Smoke Alarm - Sealed Lithium Hardwire or Radio Interlink
Ei141 / Ei168RC141RC Mains Powered Ionisation Alarm - 9V Alkaline Hardwire or Radio Interlink
Ei144 / Ei168RC144RC Mains Powered Heat Alarm - 9V Alkaline Hardwire or Radio Interlink
Ei146 / Ei168RC146RC Mains Powered Optical Smoke Alarm - 9V Alkaline Hardwire or Radio Interlink
Ei3100RF Battery Powered Ionisation Smoke Alarm - 9V Alkaline Radio Interlink
Ei3103RF Battery Powered Heat Alarm - 9V Alkaline Radio Interlink
Ei3105RF Battery Powered Optical Smoke Alarm - 9V Alkaline Radio Interlink
Ei603RF Battery Powered Heat Alarm - Sealed Lithium Radio Interlink
Ei650RF Battery Powered Optical Smoke Alarm - Sealed Lithium Radio Interlink

Carbon Monoxide Alarms

Model Number
Type of unit
Type of interlink
Ei3018 / Ei3018RF Mains Powered Carbon Monoxide Alarm - Sealed Lithium Hardwire or Radio Interlink
Ei3028 / Ei3028RF Mains Powered Heat & Carbon Monoxide Alarm - Sealed Lithium Hardwire or Radio Interlink
Ei262 Mains Powered Carbon Monoxide Alarm - Sealed Lithium Hardwire or Radio Interlink
Ei261 Mains Powered Carbon Monoxide Alarm - Sealed Lithium Hardwire Interlink
Ei208WRF Battery Powered Carbon Monoxide Detector - Sealed Lithium Radio Iinterlink

Ancillary Products

Model Number
Type of unit
Type of interlink
Ei170RF Mains Powered Strobe and Vibration Pad for the Hearing Impaired - Sealed Lithium Radio Interlink
Ei407 Battery Powered Manual Call Point - Sealed Lithium Radio Interlink
MCP401RC Mains Powered Manual Call Point Hardwire Interlink
Ei450 Battery Powered Fire and CO Alarm Controller - Sealed Lithium Radio Interlink
Ei411H Battery Powered Locate, Silence & Test Control Switch - Sealed Lithium Radio Interlink
Ei410TRF Battery Powered Test Remote - Sealed Lithium Radio Interlink (Ei3100RF Series)
Ei1529RC Mains Powered Locate, Silence & Test Control Switch Hardwire Interlink
Ei159 Mains Powered Smoke Alarm Locator Switch Hardware Interlink
Ei428 Mains Powered 5A Relay Module Radio Interlink
Ei128R Mains Powered 5A Relay Module Hardwire Interlink
Ei128RBU Mains Powered 5A Relay Module with Lithium Backup Battery Hardwire Interlink
Y03 Mains Powered Multi Frequency Sounder Hardwire Interlink (via relay)
SAB300C Mains Powered Flashing Xenon Strobe (Clear) Hardwire Interlink (via relay)
SAB300R Mains Powered Flashing Xenon Strobe (Red) Hardwire Interlink (via relay)

Wiring Explained

Mains powered Ei Electronics smoke and heat alarms require a 230V AC power supply and up to 12 alarms can be hardwire interlinked in one system.

To obtain a mains power supply, each alarm can be connected to the nearest lighting circuit using 2 core and earth cable with a separate, dedicated interlink cable connecting alarms where applicable. However, if possible it is recommended that any alarms connected via interlink cable are all powered from a dedicated circuit from the distribution board using 3 core and earth cable for safety during maintenance, as the interlink cable will carry power from live alarms on other power circuits. Please see the diagram below:-

Wiring Mains Powered Alarms

Technical Data
Product Code EI140KIT1H3S-RF
Alternative Product Codes EI144RF, EI146RF, EI168RC146RC, EI168RC144RC
Brand EI Electronics
Back-Up Battery

Alarm: 9V Alkaline

Radio Frequency Base: Lithium

Dimensions (HxDia)

Smoke Alarm: 50 x 150mm

Heat Alarm: 62 x 150mm

Operating Temperature

0°C to 40°C

Relative Humidity

15% to 95% Relative Humidity

Sound Output

85dB at 3 metres

Weight 2.00kg
Product Datasheets

Pricing & Availability

Model Stock Price
Product Code: EI140KIT1H3S-RF Stock Level:
Available to order Expected dispatch: 16th Aug
Price:

£327.35 inc VAT

£272.79 ex VAT

Delivery Options

The following delivery options are available on this product.

Economy Delivery

£4.99 inc VAT - Orders will be delivered in 5-7 working days with Hermes

Expedited Delivery

£8.10 inc VAT - Orders will be delivered in 3-4 working days with Hermes

Excellent Warranty

This product is supplied with a 5 year manufacturers warranty as standard

Looking for more information?

If you have any questions or would like more information about this product you can ask one of our specialists.

Live Chat Available Now
Direct Telephone 01507 464181