Fitted with a sealed self-charging back-up battery, the Ei164e is a 230V mains powered heat alarm that can be hard-wire interlinked with up to 12 other smoke and heat alarms within the same series. The Ei164e heat alarm is designed for use in kitchen areas (and dusty areas such as garages) and is available in two versions: Ei164e supplied complete with Easi-fit base and Ei164RCEK replacement kit, which is supplied without the base. Its mains powered design makes the heat alarm suitable for installations complying to BS 5839-6 Grade D1.
- Power: 230V mains powered with lifetime back-up battery
- Backup: Self-charging lithium battery
- Warranty: 5 year warranty
- CE marked and Kitemarked to BS 5446-2: 2003
- Available in two versions:
- Suitable for installations complying to Grade D1
- Up to 12 units can be hard-wire interlinked within the same system
- Heat sensor - activates at 58 °C to avoid false alarms from cooking fumes
- Can be wirelessly interlinked using an optional RadioLINK+ module - Ei100MRF
- Test and hush button facility
- Memory feature - makes it easy to identify an alarm that has previously gone off
- Suitable for kitchen areas and garages
- Supplied with fixings; 2 x screws and 2 x rawl plugs
- This alarm is also suitable for the updated 2022 Scottish legislation for fire alarms in homes
Please Note: The simple installation process of the easichange replacements kits negates the need of an electrician.
The table below shows all the units that can interlink with the EI160 series.
Smoke and Heat Alarms
Model Number
|
Type of Unit
|
Type of Interlink
|
Ei3014 / Ei3014RF |
Mains Powered Heat Alarm - Sealed Lithium |
Hardwire Interlink |
Ei3016 / Ei3016RF |
Mains Powered Optical Smoke Alarm - Sealed Lithium |
Hardwire Interlink |
Ei3024 / Ei3024RF |
Mains Powered Optical & Heat Alarm - Sealed Lithium |
Hardwire Interlink |
Ei3028 / Ei3028RF |
Mains Powered Heat & Carbon Monoxide Alarm - Sealed Lithium |
Hardwire Interlink |
Ei2110e / Ei2110eRF |
Mains Powered Multi Sensor Smoke & Heat Alarm - Sealed Lithium |
Hardwire Interlink |
Ei161e / Ei161eRF |
Mains Powered Ionisation Smoke Alarm - Sealed Lithium |
Hardwire Interlink |
Ei164e / Ei164eRF |
Mains Powered Heat Alarm - Sealed Lithium |
Hardwire Interlink |
Ei166e / Ei166eRF |
Mains Powered Optical Smoke Alarm - Sealed Lithium |
Hardwire Interlink |
Ei141 / Ei168RC141RC |
Mains Powered Ionisation Alarm - 9V Alkaline |
Hardwire Interlink |
Ei144 / Ei168RC144RC |
Mains Powered Heat Alarm - 9V Alkaline |
Hardwire Interlink |
Ei146 / Ei168RC146RC |
Mains Powered Optical Smoke Alarm - 9V Alkaline |
Hardwire Interlink |
Carbon Monoxide Alarms
Model Number
|
Type of unit
|
Type of interlink
|
Ei3018 / Ei3018RF |
Mains Powered Carbon Monoxide Alarm - Sealed Lithium |
Hardwire Interlink |
Ei3028 / Ei3028RF |
Mains Powered Heat & Carbon Monoxide Alarm - Sealed Lithium |
Hardwire Interlink |
Ei261 |
Mains Powered Carbon Monoxide Alarm - Sealed Lithium |
Hardwire Interlink |
Ancillary Products
Model Number
|
Type of unit
|
Type of interlink
|
MCP401RC |
Mains Powered Manual Call Point |
Hardwire Interlink |
Ei1529RC |
Mains Powered Locate, Silence & Test Control Switch |
Hardwire Interlink |
Ei159 |
Mains Powered Smoke Alarm Locator Switch |
Hardware Interlink |
Ei128R |
Mains Powered 5A Relay Module |
Hardwire Interlink |
Ei128RBU |
Mains Powered 5A Relay Module with Lithium Backup Battery |
Hardwire Interlink |
Y03 |
Mains Powered Multi Frequency Sounder |
Hardwire Interlink (via relay) |
SAB300C |
Mains Powered Flashing Xenon Strobe (Clear) |
Hardwire Interlink (via relay) |
SAB300R |
Mains Powered Flashing Xenon Strobe (Red) |
Hardwire Interlink (via relay) |
Wiring Explained
Mains powered Ei Electronics smoke and heat alarms require a 230V AC power supply and up to 12 alarms can be hardwire interlinked in one system.
To obtain a mains power supply, each alarm can be connected to the nearest lighting circuit using 2 core and earth cable with a separate, dedicated interlink cable connecting all alarms. However, if possible it is recommended that the alarms are all powered from a dedicated circuit from the distribution board using 3 core and earth cable for safety during maintenance, as the interlink cable will carry power from live alarms on other power circuits. Please see the diagram below:-