The ESP Optical Smoke Detector incorporates Hochiki’s newest High Performance Chamber technology which removes the need to use ionisation smoke detectors in the majority of situations. It also allows the sensor threshold level to be increased, thereby improving the signal to noise ratio and reducing susceptibility to false alarms. Featuring variable sensitivity, twin LEDs for 360° viewing, and an easily removable smoke chamber for cleaning, the ESP Optical Smoke Detector is ideal for any Hochiki ESP-compatible addressable fire alarm system.
- Available with a standard mounting base, short-circuit isolator base, or without a base
- Removable High Performance Chamber
- Twin LEDs allow 360 viewing - green when polling, red in alarm
- Unique "baffle" design allows smoke to enter the chamber whilst blocking ambient light
- Locking mechanism (sensor to base)
- Variable sensitivity can be configured at the panel
- Electronically addressed for location reporting in the event of a fire
- Hochiki ESP protocol for loop communication
- Compatible with Morley DXc and Advanced Electronics' MxPro 5 series panels
- Pulsing/non-pulsing controlled from panel
- Approved by LPCB & VdS
- Free BIM Object available from the NBS National BIM Library
The tables below show all the units available from Safelincs that are compatible with this device.
Product Code
|
Type of unit
|
Network
|
Morley DXc1
|
Panel - 1 Loop
|
max. 16 Loops, 126 Devices per Loop; separate DXc Network Card required for each panel
|
Morley DXc2
|
Panel - 2 Loop
|
max. 16 Loops, 126 Devices per Loop; separate DXc Network Card required for each panel
|
Morley DXc4
|
Panel - 4 Loop
|
max. 16 Loops, 126 Devices per Loop; separate DXc Network Card required for each panel
|
Advanced MX-5101
|
1 Loop Panel
|
max. 200 Nodes, 127 Devices per Loop / 200,000 Devices per Network
|
Advanced MX-5201
|
1 - 2 Loop Panel
|
max. 200 Nodes, 127 Devices per Loop / 200,000 Devices per Network
|
Advanced MX-5401
|
1 - 4 Loop Panel
|
max. 200 Nodes, 127 Devices per Loop / 200,000 Devices per Network
|
Product Code
|
Type of unit
|
MPN
|
EUHOAOPS
|
Optical Smoke Detector
|
ALN-EN
|
EUHOAHEA
|
Heat Detector
|
ATJ-EN
|
EUHOAHEAIP
|
IP67 Weatherproof Heat Detector
|
ACB-EW
|
EUHOAMUS
|
Multi-Sensor (Optical + Heat) Detector
|
ACC-EN
|
EUHOADEB
|
Standard Detector Base
|
YBN-R/3
|
EUHOAISB
|
Short Circuit Isolator Detector Base
|
YBN-R/3(SCI)
|
EUHOADEBSO
|
Sounder Base for Detectors (requires EUHOADEB or EUHOAISB)
|
YBO-BS
|
EUHOADEBSOBER
|
Sounder VAD Base for Detectors (requires EUHOADEB or EUHOAISB)
|
YBO-BSB2/RL
|
Product Code
|
Type of unit
|
MPN
|
EUHOACAI
|
Call Point with Isolator
|
HCP-E(SCI)
|
EUHOACAIW
|
Weatherproof Call Point with Isolator
|
HCP-W(SCI)
|
EUHOASBB
|
Surface Mounting Box (for EUHOACAI)
|
SR
|
Product Code
|
Type of unit
|
MPN
|
EUHOADEBSO
|
Sounder Base for Detectors (requires EUHOADEB or EUHOAISB)
|
YBO-BS
|
EUHOADEBSOBER
|
Sounder VAD Base for Detectors (requires EUHOADEB or EUHOAISB)
|
YBO-BSB2/RL
|
EUHOACEBER
|
Loop Powered Ceiling VAD (red LED)
|
CHQ-CB/RL
|
EUHOASOB
|
Mounting Base for Wall Sounders (red)
|
YBO-R/3(RED)
|
EUHOASOISB
|
Short Circuit Isolator Mounting Base for Wall Sounders (red)
|
YBO-R/SCI(RED)
|
EUHOAWASO
|
Wall Sounder (red)
|
CHQ-WS2
|
EUHOAWASOBER
|
Wall Sounder VAD (red with red LED)
|
CHQ-WSB2/RL
|
Product Code
|
Type of unit
|
MPN
|
EUHOAADP
|
Address Programmer
|
TCH-B200
|
EUHOACAPL
|
Call Point Programming Lead
|
PL-3
|
EUHOACAPL2
|
Legacy Device Programming Lead
|
PL-2
|
EUHOACAP
|
Single Input Monitor
|
CHQ-CP(PCB)
|