Fire & Safety Solutions
CALL OUR TEAM NOW 0800 612 6537
Lines open today 8am - 6pm
Quick Delivery
From £3.19 inc VAT
Secure Payments
with our fast checkout
Live Customer Chat
Available Now
30 Day Accounts
for Public Sector
5 Star Customer Feedback
Hochiki ESP IP67 Weatherproof Heat Detector
Product Overview
Compatible Devices
Technical Data
The ESP Weatherproof Heat Detector incorporates both a fixed and a rate-of-rise temperature sensor which can be controlled from an ESP-compatible panel, allowing engineers to choose whether one or both of the sensors are active in detecting a fire. With its IP67 rating, this detector can be used in workshops where other units could fail due to water contact or large amounts of particulates, or even outside. The ESP Weatherproof Heat Detector is even supplied with waterproof connectors for its flying leads.
- User-selectable sensor modes
- Combines a fixed temperature and a rate-of-rise heat sensor
- Configurable sensor modes: A1R, A1S, BR, BS, CR, & CS
- Twin LEDs allow 360 degree viewing - green when polling, red in alarm
- Pulsing/non-pulsing LEDs (controlled from compatible panels)
- Electronically addressed during installation
- Hochiki ESP protocol for loop communication
- IP67 rating for demanding environments and outdoor use
- Supplied with fixing base and waterproof connectors
- Compatible with Morley DXc and Advanced Electronics' MxPro 5 series panels
- LPCB & VdS approved to Classes A, B & C
Please note: the PL-2 programming lead is required to connect this detector to the TCH-B200 address programmer.
The tables below show all the units available from Safelincs that are compatible with this device.
Panels and Repeaters
|
Product Code
|
Type of unit
|
Network
|
| Morley DXc1 | Panel - 1 Loop | max. 16 Loops, 126 Devices per Loop; separate DXc Network Card required for each panel |
| Morley DXc2 | Panel - 2 Loop | max. 16 Loops, 126 Devices per Loop; separate DXc Network Card required for each panel |
| Morley DXc4 | Panel - 4 Loop | max. 16 Loops, 126 Devices per Loop; separate DXc Network Card required for each panel |
| Advanced MX-5101 | 1 Loop Panel | max. 200 Nodes, 127 Devices per Loop / 200,000 Devices per Network |
| Advanced MX-5201 | 1 - 2 Loop Panel | max. 200 Nodes, 127 Devices per Loop / 200,000 Devices per Network |
| Advanced MX-5401 | 1 - 4 Loop Panel | max. 200 Nodes, 127 Devices per Loop / 200,000 Devices per Network |
Detectors and Bases
|
Product Code
|
Type of unit
|
MPN
|
| EUHOAOPS | Optical Smoke Detector | ALN-EN |
| EUHOAHEA | Heat Detector | ATJ-EN |
| EUHOAHEAIP | IP67 Weatherproof Heat Detector | ACB-EW |
| EUHOAMUS | Multi-Sensor (Optical + Heat) Detector | ACC-EN |
| EUHOADEB | Standard Detector Base | YBN-R/3 |
| EUHOAISB | Short Circuit Isolator Detector Base | YBN-R/3(SCI) |
| EUHOADEBSO | Sounder Base for Detectors (requires EUHOADEB or EUHOAISB) | YBO-BS |
| EUHOADEBSOBER | Sounder VAD Base for Detectors (requires EUHOADEB or EUHOAISB) | YBO-BSB2/RL |
Manual Call Points
|
Product Code
|
Type of unit
|
MPN
|
| EUHOACAI | Call Point with Isolator | HCP-E(SCI) |
| EUHOACAIW | Weatherproof Call Point with Isolator | HCP-W(SCI) |
| EUHOASBB | Surface Mounting Box (for EUHOACAI) | SR |
Sounders and Beacons
|
Product Code
|
Type of unit
|
MPN
|
| EUHOADEBSO | Sounder Base for Detectors (requires EUHOADEB or EUHOAISB) | YBO-BS |
| EUHOADEBSOBER | Sounder VAD Base for Detectors (requires EUHOADEB or EUHOAISB) | YBO-BSB2/RL |
| EUHOACEBER | Loop Powered Ceiling VAD (red LED) | CHQ-CB/RL |
| EUHOASOB | Mounting Base for Wall Sounders (red) | YBO-R/3(RED) |
| EUHOASOISB | Short Circuit Isolator Mounting Base for Wall Sounders (red) | YBO-R/SCI(RED) |
| EUHOAWASO | Wall Sounder (red) | CHQ-WS2 |
| EUHOAWASOBER | Wall Sounder VAD (red with red LED) | CHQ-WSB2/RL |
Loop Configuration
|
Product Code
|
Type of unit
|
MPN
|
| EUHOAADP | Address Programmer | TCH-B200 |
| EUHOACAPL | Call Point Programming Lead | PL-3 |
| EUHOACAPL2 | Legacy Device Programming Lead | PL-2 |
| EUHOACAP | Single Input Monitor | CHQ-CP(PCB) |
| Product Code | EUHOAHEAIP |
|---|---|
| Alternative Product Codes | ACB-EW |
| Brand | Hochiki |
| Current Consumption | 19mA |
| Dimensions (HxDia) | 46mm x 100mm |
| IP Rating | IP67 |
| Operating Humidity | 95% RH - Non-Condensing (at 40°C) |
| Operating Temperature | -10°C to 50°C |
| Operating Voltage | 17 - 41V DC |
| Storage Temperature | -30°C to 60°C |
| Weight | 0.10kg |
| Product Datasheets |
|
Pricing & Availability
| Model | Stock | Price |
|---|---|---|
| Product Code: EUHOAHEAIP |
Stock Level:
5 in stock Expected dispatch: Tomorrow
|
Price:
£71.87 inc VAT £59.89 ex VAT |
Delivery Options
The following delivery options are available on this product.
Related Products
Advanced MxPro 5 MX-5101 Addressable Single Loop Panel
Write a review£951.23 inc VAT
£792.69 ex VAT
Advanced MxPro 5 MX-5201 Addressable 1 - 2 Loop Panel
Write a review£1,230.23 inc VAT
£1,025.19 ex VAT
Advanced MxPro 5 MX-5401 Addressable 1 - 4 Loop Panel
Write a review£1,773.83 inc VAT
£1,478.19 ex VAT
Hochiki ESP Address Programmer with Optional Call Point Programming Lead
Write a review£113.99 inc VAT
£94.99 ex VAT
Looking for more information?
If you have any questions or would like more information about this product you can ask one of our specialists.
Live Chat Available Now
Direct Telephone
01507 464183