Hochiki's ESP address programmer is used to easily and reliably give network addresses to Hochiki ESP addressable fire alarm system devices, such as detectors and manual call points. Powered by a standard 9V PP3 battery, the TCH-B200 can provide up to 8,000 addresses on a single battery – several loops' worth of devices can be configured without worry. With the ability to display address values from connected detectors, this easy-to-use, light, and robust handheld unit is a must-have tool for any Hochiki ESP protocol addressable fire alarm system.
- One battery provides up to 8,000 addresses
- Quick and reliable functionality
- Used to address detectors, sounders, beacons, call points, and all other Hochiki ESP protocol addressable devices
- Lightweight, battery-powered design for ease of use
- Displays analogue value of connected detectors
- Requires the PL-3 programming lead for use on Hochiki ESP manual call points
- A PL-2 programming lead (sold separately) is required for the ACB-EW weatherproof heat detector and other legacy products
- Powered by a single standard 9V battery
- European Directive on Electromagnetic Compatibility 2014/30/EU compliant
The tables below show all the units available from Safelincs that are compatible with this device.
Product Code
|
Type of unit
|
Network
|
Morley DXc1
|
Panel - 1 Loop
|
max. 16 Loops, 126 Devices per Loop; separate DXc Network Card required for each panel
|
Morley DXc2
|
Panel - 2 Loop
|
max. 16 Loops, 126 Devices per Loop; separate DXc Network Card required for each panel
|
Morley DXc4
|
Panel - 4 Loop
|
max. 16 Loops, 126 Devices per Loop; separate DXc Network Card required for each panel
|
Advanced MX-5101
|
1 Loop Panel
|
max. 200 Nodes, 127 Devices per Loop / 200,000 Devices per Network
|
Advanced MX-5201
|
1 - 2 Loop Panel
|
max. 200 Nodes, 127 Devices per Loop / 200,000 Devices per Network
|
Advanced MX-5401
|
1 - 4 Loop Panel
|
max. 200 Nodes, 127 Devices per Loop / 200,000 Devices per Network
|
Product Code
|
Type of unit
|
MPN
|
EUHOAOPS
|
Optical Smoke Detector
|
ALN-EN
|
EUHOAHEA
|
Heat Detector
|
ATJ-EN
|
EUHOAHEAIP
|
IP67 Weatherproof Heat Detector
|
ACB-EW
|
EUHOAMUS
|
Multi-Sensor (Optical + Heat) Detector
|
ACC-EN
|
EUHOADEB
|
Standard Detector Base
|
YBN-R/3
|
EUHOAISB
|
Short Circuit Isolator Detector Base
|
YBN-R/3(SCI)
|
EUHOADEBSO
|
Sounder Base for Detectors (requires EUHOADEB or EUHOAISB)
|
YBO-BS
|
EUHOADEBSOBER
|
Sounder VAD Base for Detectors (requires EUHOADEB or EUHOAISB)
|
YBO-BSB2/RL
|
Product Code
|
Type of unit
|
MPN
|
EUHOACAI
|
Call Point with Isolator
|
HCP-E(SCI)
|
EUHOACAIW
|
Weatherproof Call Point with Isolator
|
HCP-W(SCI)
|
EUHOASBB
|
Surface Mounting Box (for EUHOACAI)
|
SR
|
Product Code
|
Type of unit
|
MPN
|
EUHOADEBSO
|
Sounder Base for Detectors (requires EUHOADEB or EUHOAISB)
|
YBO-BS
|
EUHOADEBSOBER
|
Sounder VAD Base for Detectors (requires EUHOADEB or EUHOAISB)
|
YBO-BSB2/RL
|
EUHOACEBER
|
Loop Powered Ceiling VAD (red LED)
|
CHQ-CB/RL
|
EUHOASOB
|
Mounting Base for Wall Sounders (red)
|
YBO-R/3(RED)
|
EUHOASOISB
|
Short Circuit Isolator Mounting Base for Wall Sounders (red)
|
YBO-R/SCI(RED)
|
EUHOAWASO
|
Wall Sounder (red)
|
CHQ-WS2
|
EUHOAWASOBER
|
Wall Sounder VAD (red with red LED)
|
CHQ-WSB2/RL
|
Product Code
|
Type of unit
|
MPN
|
EUHOAADP
|
Address Programmer
|
TCH-B200
|
EUHOACAPL
|
Call Point Programming Lead
|
PL-3
|
EUHOACAPL2
|
Legacy Device Programming Lead
|
PL-2
|
EUHOACAP
|
Single Input Monitor
|
CHQ-CP(PCB)
|