CALL OUR TEAM NOW 0800 612 6537 Also FREE from UK mobiles

Hochiki ESP Manual Call Point with Isolator for Flush or Surface Mounting

Write a review
Choose a product To see stock availability
From: £36.83 inc VAT
£30.69 ex VAT
Product Overview

This manual call point from the Hochiki ESP range has a built-in short-circuit isolator to protect the rest of the loop from faults. The status indicator LED which will show an amber light in the event of a short circuit or red when the call point is activated. Operated by pressing the EN 54-compliant resettable plastic element, manual call points allow building occupants to trigger a fire alarm system in the event that a detector fails or when there may be a delay between a fire starting and being noticed by a detector. Compatible with Morely DXc and Advanced MxPro 5 panels, this call point is for addressable fire alarm systems which allow engineers to give each device in the network an "address" and thus provide a much more accurate origin location in the event of a fire. For testing, a special key can be inserted into the underside of the call point and remote testing from a compatible control panel is also supported.

  • Integrated short-circuit isolator to protect the loop
  • Resettable plastic element fitted as standard
  • Addressable via TCH-B200 Address Programmer
  • Supplied with two terminal blocks for easy wiring
  • Designed for flush mounting, but can be surface mounted with the SR Back Box
  • Two-colour status LED - amber for short-circuit, red for activation
  • Hochiki ESP protocol for loop communication
  • Compatible with Morley DXc and Advanced Electronics' MxPro 5 series panels
  • LPCB Approved to EN 54
  • RoHS compliant
  • Free BIM Object available from the NBS National BIM Library
Compatible Devices

The tables below show all the units available from Safelincs that are compatible with this device.

Panels and Repeaters
Product Code
Type of unit
Network
Morley DXc1 Panel - 1 Loop max. 16 Loops, 126 Devices per Loop; separate DXc Network Card required for each panel
Morley DXc2 Panel - 2 Loop max. 16 Loops, 126 Devices per Loop; separate DXc Network Card required for each panel
Morley DXc4 Panel - 4 Loop max. 16 Loops, 126 Devices per Loop; separate DXc Network Card required for each panel
Advanced MX-5101 1 Loop Panel max. 200 Nodes, 127 Devices per Loop / 200,000 Devices per Network
Advanced MX-5201 1 - 2 Loop Panel max. 200 Nodes, 127 Devices per Loop / 200,000 Devices per Network
Advanced MX-5401 1 - 4 Loop Panel max. 200 Nodes, 127 Devices per Loop / 200,000 Devices per Network

Detectors and Bases
Product Code
Type of unit
MPN
EUHOAOPS Optical Smoke Detector ALN-EN
EUHOAHEA Heat Detector ATJ-EN
EUHOAHEAIP IP67 Weatherproof Heat Detector ACB-EW
EUHOAMUS Multi-Sensor (Optical + Heat) Detector ACC-EN
EUHOADEB Standard Detector Base YBN-R/3
EUHOAISB Short Circuit Isolator Detector Base YBN-R/3(SCI)
EUHOADEBSO Sounder Base for Detectors (requires EUHOADEB or EUHOAISB) YBO-BS
EUHOADEBSOBER Sounder VAD Base for Detectors (requires EUHOADEB or EUHOAISB) YBO-BSB2/RL

Manual Call Points
Product Code
Type of unit
MPN
EUHOACAI Call Point with Isolator HCP-E(SCI)
EUHOACAIW Weatherproof Call Point with Isolator HCP-W(SCI)
EUHOASBB Surface Mounting Box (for EUHOACAI) SR

Sounders and Beacons
Product Code
Type of unit
MPN
EUHOADEBSO Sounder Base for Detectors (requires EUHOADEB or EUHOAISB) YBO-BS
EUHOADEBSOBER Sounder VAD Base for Detectors (requires EUHOADEB or EUHOAISB) YBO-BSB2/RL
EUHOACEBER Loop Powered Ceiling VAD (red LED) CHQ-CB/RL
EUHOASOB Mounting Base for Wall Sounders (red) YBO-R/3(RED)
EUHOASOISB Short Circuit Isolator Mounting Base for Wall Sounders (red) YBO-R/SCI(RED)
EUHOAWASO Wall Sounder (red) CHQ-WS2
EUHOAWASOBER Wall Sounder VAD (red with red LED) CHQ-WSB2/RL

Loop Configuration
Product Code
Type of unit
MPN
EUHOAADP Address Programmer TCH-B200
EUHOACAPL Call Point Programming Lead PL-3
EUHOACAPL2 Legacy Device Programming Lead PL-2
EUHOACAP Single Input Monitor CHQ-CP(PCB)
Technical Data
Product Code

Flush:  EUHOACAI

Surface:  EUHOACAISBB

Brand Hochiki
Current Consumption

Low Power Mode: 180?A (max), 100?A (typical)

Quiescent Current: 350?A (max), 250?A (typical)

Alarm Current: 10mA (max), 5mA (typical)

Dimensions (HxWxD)

Flush Mounted: 93mm x 89mm x 27.5mm

Surface Mounted: 93mm x 89mm x 59.5mm

IP Rating

IP24

Maximum Humidity

95% RH - Non-Condensing (at 40°C)

Operating Temperature

-10°C to 50°C

Operating Voltage

17 - 41V DC

Storage Temperature

-30°C to 70°C

Weight

Flush Mounted: 110g

Surface Mounted: 161g

Weight

EUHOACAI: 0.11kg

EUHOACAISBB: 0.16kg

Product Datasheets

Pricing & Availability

Model Stock Price
Flush
Product Code: EUHOACAI
Stock Level:
20 in stock Expected dispatch: Tomorrow
Price:

£36.83 inc VAT

£30.69 ex VAT

Surface
Product Code: EUHOACAISBB
Stock Level:
20 in stock Expected dispatch: Tomorrow
Price:

£39.83 inc VAT

£33.19 ex VAT

Delivery Options

The following delivery options are available on this product.

Standard Delivery

£3.19 inc VAT - Orders will be delivered in 2-3 working days with Evri

Next Working Day Delivery

£6.19 inc VAT - Orders will be delivered the next working day with Evri

For dispatch today order within

Looking for more information?

If you have any questions or would like more information about this product you can ask one of our specialists.

Live Chat Available Now
Direct Telephone 01507 464183

Settings

Colour Scheme

Light
Dark

Pricing Display

Inc VAT
Ex VAT

Cookies

By continuing to browse this site you agree to the use of cookies.