These refurbished CO2 fire extinguishers saves you money while being environmentally friendly. The 20 step refurbishment process ensures that the extinguishers are of the highest quality. These extinguishers provide cost-effective fire protection and have a much lower .
- Refurbished CO2 fire extinguisher
- Rating 34B and electrical
- available
- Available with or without frost free horn
- Environmentally friendly products
- Cost-effective fire protection
- May be supplied in steel or lightweight aluminium cylinder
- 1 Year Warranty
- Stored pressure CO2 fire extinguisher
Please Note: Most refurbished extinguishers will be in aluminium cylinders but some may be steel so the weight of the unit provided may vary from under 5kg to over 6kg, and in rare cases may be even heavier. Refurbished CO2 extinguishers are NOT supplied with wall brackets and all CO2 extinguishers must be fitted with a suitable horn before use.
Our refurbished CO2 fire extinguishers are subjected to intensive testing during the refurbishment process. The 20 step process involves stress and pressure tests to ensure the integrity of the cylinder, sand-blasting, re-painting and labelling, and the installation of a brand new head valve assembly.
- Discharge of CO2 gas
- Remove valve
- Inspect cylinder
- Remove labels
- Internally check cylinder
- Pressure test cylinder
- Shot blast cylinder
- Linish any paint remaining
- Weigh cylinder
- Date stamp cylinder
- Record cylinder details
- Epoxy paint cylinder
- Move to assembly area
- Assemble CO2 valve
- Fit valve assembly
- Label cylinder
- Fill cylinder
- 24 hour pressure check
- Box extinguishers
- Send to stores for dispatch
Q. Do your extinguishers come fully serviced and ready to use on delivery?
A. All our portable fire extinguishers are supplied fully charged and ready for use. Wheeled fire extinguishers with large capacity might require initial filling and charging. The product listing will explain this. There are options on the website if you are required to have your extinguishers commissioned on-site and we also offer a full installation service. These additional services will require an engineer to visit your site to carry out the work required.
Q. What height should extinguishers be installed at?
A. The height at which to install extinguishers depends on the total weight of that particular extinguisher. If the weight of the extinguisher is less than 4kg, the top of the handle should be 1.5m above ground level when installed. If the mass weight is more than 4kg, the top of the handle should be 1.0m above ground level. When there is a combination of the two, both can be set at the height of the heaviest extinguisher.
Q. Can I request fire extinguisher certification?
A. Extinguisher certification is included in the extinguisher commissioning charge. You can add this on to your order either online or over the telephone. We also offer nationwide extinguisher servicing.
Q. Are photoluminescent wall signs included in the price of the extinguisher installation?
A. No, you need to add them to your order.