CALL OUR TEAM NOW 0800 612 6537 Lines open today 8am - 6pm

Mains Powered Optical Smoke Alarm with Self-Charging 10 Year Back-up Battery - BRK 7010LBE

Discontinued Product - No Compatible Replacement

Please Note: The manufacturer has withdrawn from the European market and is no longer supplying compatible alternatives. Since it is not possible to interlink alarms from different manufacturers, the recommended replacement for the discontinued BRK 7010LBE is the Firehawk FHN250RB.

alternative product

Firehawk FHN Mains Powered Alarms with Lithium Back-up

With self-charging back-up batteries, these mains-powered smoke and heat alarms from Firehawk won't need new batteries for their full 10 year lifespan. Ideal for Grade D1 and Scottish installations.

  • 230V mains power with self-charging lithium battery backup
  • 10 years manufacturer's warranty
  • Hardwire interlink up to 15 Firehawk smoke and heat alarms.
  • Also suitable for the 2022 Scottish legislation

£31.79 inc VAT

£26.49 ex VAT

View Product
Product Overview

The BRK 7010LBE mains powered optical smoke alarm is suitable for installations needing to comply with BS 5839-6: 2019 Grade D1. This alarm is fitted with a lifetime lithium back-up battery in case of mains failure. This alarm has a lifespan of 10 years and can be hardwire interlinked with up to 12 compatible smoke and 6 compatible heat alarms. The alarm features a combined test and silence button and a visual LED to indicate power and that the unit is fully operational.

  • Power: 230V mains powered smoke alarm
  • Backup Battery: Lithium back-up battery lasts the lifetime of your alarm - GUARANTEED
  • Warranty: 10 year warranty
  • Suitable for BS 5839-6: 2019 Grade D1 installations
  • Hardwire interlink with up to 12 compatible smoke alarms and 6 compatible heat alarms
  • CE marked and Kitemarked to BS EN 14604:2005
  • A locking feature deters removal of the alarm
  • Patented ceiling entry smoke detection system
  • Combined test and silence button
  • Easy to perform a full check (circuit, horn, battery and sensor)
  • Visual LED to indicate power and functionality
  • Supplied with fixings; 2 x screws and 2 x rawl plugs
  • Product warranty and life commences from date of purchase
  • This alarm is also suitable for the updated 2022 Scottish legislation for fire alarms in homes
Interlink

The table below shows all the units that can interlink with the BRK 7010BE and 7010LBE smoke alarms.

Alarms from the Same Series

Model Number Type of unit Type of interlink
7010BE Optical Smoke Alarm Hard wire interlink
7010LBE Optical Smoke Alarm Hard wire interlink

Compatible 600 Series Alarms

Model Number Type of unit Type of interlink
670MBX Ionisation Smoke Alarm Hard wire interlink
660MBX Optical Smoke Alarm Hard wire interlink
690MBX Heat Alarm Hard wire interlink

Compatible 700 Series Alarms

Model Number Type of unit Type of interlink
770MRL Ionisation Smoke Alarm Hard wire interlink
760MRL Optical Smoke Alarm Hard wire interlink
790MRL Heat Alarm Hard wire interlink
Technical Data
Product Code BK7010LBE
Alternative Product Codes BK7010LBE, 7010LBE
Brand BRK
Back-Up Battery

Self-charging Lithium Battery

Dimensions (HxDia)

48x127mm

Operating Temperature

+4°C to +38°C

Relative Humidity

10% to 85%

Sound Output

85dB

Warranty

10 years

Weight 0.24kg
Product Datasheets
FAQs (2)
Q. What sort of smoke alarm system would I need to install for a HMO?
A.

BS 5839-6 recommends that one or two storey HMOs with an individual floor area of no more than 200sqm (not the total of both floors) should have a Grade D smoke alarm system installed. Grade D refers to mains powered smoke alarms with a back up battery power supply. The alarms can be interlinked either by wire or by radio signal and the system does not require a separate fire alarm panel. For HMOs of 3 storey or higher, a Grade A panel system would need to be installed. This can cover the whole of the building, or can be used just for the communal areas with a separate Grade D system installed for the individual dwellings. For both applications, the level of cover should be a minimum of LD3 (in all escape routes) but this may change according to the fire risk assessment.

Q. Can a smoke alarm be fitted with a sticky adhesive pad in a let property?
A.

The sticky pad is suitable for all battery operated smoke alarms. However, we cannot judge if battery alarms are suitable for your let property, as let properties usually require mains powered alarms. There is some advice to this in the governments guides to fire risk assessments. http://www.safelincs.co.uk/Fire-Risk-Assessment/ Also see the LACoRS guide for let properties.

Excellent Warranty

This product is supplied with a 10 year manufacturers warranty as standard

Customer Reviews

1 customer has given this product an overall rating of 4 out of 5

Reviews by real customers

All of our product reviews are written by real customers that have purchased this product from us and are published without modification.

Rating: 4 / 5 Stars

Reviewed by:

As a consumer I am pleased with the product and service.

Published on: 21st March 2020

Looking for more information?

If you have any questions or would like more information about this product you can ask one of our specialists.

Live Chat Available Now
Direct Telephone 01507 464181

Settings

Colour Scheme

Light
Dark

Pricing Display

Inc VAT
Ex VAT

Cookies

By continuing to browse this site you agree to the use of cookies.