CALL OUR TEAM NOW 0800 612 6537 Lines open today 8am - 6pm

Mains Powered Carbon Monoxide Alarm with 9V Back-up Battery - FireAngel CW1-PF

Discontinued Product

This product has been discontinued.

alternative product

Mains Powered Carbon Monoxide Alarm with Back-up - EI3018

  • Product Lifespan: 10 years
  • Power: 230V mains powered with battery backup
  • Backup Battery: Re-chargeable lithium battery
  • Warranty: 5 year warranty
  • AudioLINK: real time data extraction to a smart phone
  • High performance electrochemical sensor
  • Hardwire interlink with up to 12 compatible alarms
  • Kitemarked to BS EN 50291-1: 2010
  • Suitable for ceiling installation
  • Also suitable for both the Welsh and Scottish 2022 legislation

£64.67 inc VAT

£53.89 ex VAT

View Product
Product Overview

The FireAngel CW1 with push fit base is a mains powered carbon monoxide alarm with a replaceable 9V back-up battery and a 10 year sensor lifespan. The alarm has a large, easy to use test button and features a safety clip that ensures that the alarm cannot be fitted to its base without the back-up battery present. To ensure all occupants are warned of this invisible, odorless and deadly gas, the CW1-PF can be interlinked with up to a total of 12 W1 series mains powered alarms including other CW1 carbon monoxide alarms, SW1-R optical smoke alarms and HW1-R heat alarms.

  • Product Lifespan: 10 years
  • Power: 230V mains powered with battery backup
  • Backup Battery: 9V alkaline or zinc carbon battery (included)
  • Warranty: 1 year warranty
  • Suitable for ceiling installation
  • 10 year electrochemical carbon monoxide sensor
  • Large, easy to use central test button
  • Loud 85dB alarm
  • Up to 12 W1 series alarms can be hard-wire interlinked within a single system, including:
  • Three LED status indicators – power, fault, and alarm
  • Low battery warning
  • Independently tested to EN 50291-1:2010
  • This alarm is also suitable for both the Welsh and Scottish updated 2022 legislation
Interlink

The table below shows all the units that can interlink with the FireAngel W1-R alarms.

Model Number Type of unit Type of interlink
SW1-R Mains Powered Optical Smoke Alarm Hard-wire interlink
HW1-R Mains Powered Heat Alarm Hard-wire interlink
CW1-PF-T Mains Powered Carbon Monoxide Alarm Hard-wire interlink

Technical Data
Product Code FACW1PFT
Alternative Product Codes CW1-PF-T
Brand FireAngel
Back-Up Battery

9V PP3 Alkaline or Zinc Carbon

Dimensions (HxDia)

49x126mm

Operating Temperature

0°C to 40°C

Sound Output

85dB

Weight 0.24kg
Product Datasheets

Customer Reviews

5 customers have given this product an overall rating of 4.8 out of 5

Reviews by real customers

All of our product reviews are written by real customers that have purchased this product from us and are published without modification.

Rating: 5 / 5 Stars

Reviewed by: j h

Excellent service

Published on: 13th February 2023

Rating: 4 / 5 Stars

Reviewed by: K H

Service was very good I had a fault with the first carbon monoxide alarm I bought, beeping all the time, however Safelincs replaced it immediately so I was very impressed with their customer service. The replacement alarm beeps occasionally, not enough to annoy me too much as it is only occasionally and I do feel safer for having it. I have other Fire Angel products that have never been a problem. If this continues to beep I'll replace it with a battery operated one as I've not had any issues in the past with them.

Published on: 25th September 2022

Rating: 5 / 5 Stars

Reviewed by: A O

The carbon monoxide alarm was east to instal and set up

Published on: 1st August 2022

Show More

Looking for more information?

If you have any questions or would like more information about this product you can ask one of our specialists.

Live Chat Available Now
Direct Telephone 01507 464182

Settings

Colour Scheme

Light
Dark

Pricing Display

Inc VAT
Ex VAT

Cookies

By continuing to browse this site you agree to the use of cookies.