C-Tec CFP AlarmSense Fire Alarm Panel - 4 Zone

The four zone fire CFP AlarmSense alarm panel from C-Tec can have a maximum of 25 detectors and manual call points connected to each zone. Conventional fire alarm panels typically use four wires to separate the detection device and sounder circuits; however the CFP AlarmSense has a two wire design, meaning that all components can be fitted across the same pair of supply wires. The CFP AlarmSense conventional fire alarm panel fully complies with EN 54 Parts 2 and 4 and is acceptable for BS 5839 Part 1 and Part 6 systems.

• Four zone, two-wire conventional fire alarm panel
• AlarmSense detectors, manual call points and sounders can be fitted on the same two wires
• Suitable for surface or semi-flush mounting
• Two auxiliary input connections
• Fire and fault relays
• Maximum number of detectors and manual call points per zone: 25
• Engineering functions include zone test, coincidence (double-knock), zone delay and non-latching zones
• User-friendly interface: colour coded buttons and fire and fault light indicators
• End of line units included (one per zone)
• Using a repeater driver card, the panel can be connected with up to 8 x C-Tec CFP repeater panels
• A more cost-effective and simpler installation than other conventional fire alarm panels
• Please note: The panel requires a 3.2Ah 24V back-up battery. These are sold separately.