The fixed high temperature (CS) heat detector from the Apollo AlarmSense range is ideal for use in applications where there are rapid temperature fluctuations e.g. boiler rooms. The unit changes in to the alarm state when the room or area reaches 90 °C. Designed to comply with BS 5839-1 and 6, the AlarmSense CS heat detector is available with three different base options.
- Fixed high temperature heat detector
- Activates when the temperature reaches 90 °C
- CS class heat detection - tested and approved as a "static" detector
- CE marked
- Designed to comply with BS 5839-1 and 6
- Fitted with two LEDs for 360° visibility
- Available with three different base options:
- Ideal for applications where smoke detectors are unsuitable e.g. dirty or smoky environments
- Designed for use with the CFP AlarmSense two wire fire alarm panels
- The sounder beacon base enables compliance with the Disability Discrimination Act
- Housed in a white polycarbonate moulding
Technical Data
This is the technical data for the AlarmSense CS Fixed Temperature Heat Detector.
Operating Voltage |
9-33V |
Quiescent Current |
<50µA at 15V |
Alarm Current |
At 2-8.5V: <1.5mA At 10.5-15V: 25 ± 2mA At 18-24V: <1.5mA At 33V: <2mA |
Maximum Reset Voltage |
2V |
Reset Time |
1s |
Dimensions (HxDia) |
Detector only: 42x100mm Detector with standard base: 50x100mm |
Temperature Trigger |
90 °C |
Product Datasheets
The following datasheets are available for this product.