OPEN 7 DAYS A WEEK 0800 612 6254 Lines open today 8am - 9pm

Mains Powered Combined Smoke and Heat Alarm with Self-Charging 10 Year Back-up Battery - Aico Ei2110e

4 Customer Reviews
£61.43 inc VAT
£51.19 ex VAT
Product Overview

The Ei2110e is a multi-sensor fire alarm that contains two separate sensing elements – optical and heat detection. As the unit monitors two different by-products of fires (smoke and temperature), its response to all types of fire is vastly improved over traditional single sensor alarms. It is also less prone to false alarms.

  • Power: 230V mains powered with back-up battery
  • Backup Battery: Self-charging lithium battery
  • Warranty: 5 year warranty
  • Suitable for living rooms, bedrooms, hallway, landings (not suitable for kitchen or garage)
  • Multiple sensor elements - optical and heat detectors
  • Unique dust compensation feature (The alarm automatically adjusts for any contamination within the optical sensor chamber)
  • Kitemarked to BS EN 14604: 2005
  • Suitable for installations complying to BS 5839-6: 2019 Grade D1
  • CE Marked
  • Advanced suppression and calibration technology reduces risk of false alarms to absolute minimum
  • Low battery warning
  • Test/Hush button
  • Easy-fit base
  • A maximum of 12 units can be interlinked
  • Supplied with fixings; 2 x screws and 2 x rawl plugs
  • Alarms that can be interlinked with include:
  • Remote control capability using the Ei1529RC
  • This alarm is also suitable for the updated 2022 Scottish legislation for fire alarms in homes
Interlink

The table below shows all the units that can interlink with the EI2110e.

Smoke and Heat Alarms

Model Number
Type of Unit
Type of Interlink
Ei3014 / Ei3014RF Mains Powered Heat Alarm - Sealed Lithium Hardwire Interlink
Ei3016 / Ei3016RF Mains Powered Optical Smoke Alarm - Sealed Lithium Hardwire Interlink
Ei3024 / Ei3024RF Mains Powered Optical & Heat Alarm - Sealed Lithium Hardwire Interlink
Ei3028 / Ei3028RF Mains Powered Heat & Carbon Monoxide Alarm - Sealed Lithium Hardwire Interlink
Ei2110e / Ei2110eRF Mains Powered Multi Sensor Smoke & Heat Alarm - Sealed Lithium Hardwire Interlink
Ei161e / Ei161eRF Mains Powered Ionisation Smoke Alarm - Sealed Lithium Hardwire Interlink
Ei164e / Ei164eRF Mains Powered Heat Alarm - Sealed Lithium Hardwire Interlink
Ei166e / Ei166eRF Mains Powered Optical Smoke Alarm - Sealed Lithium Hardwire Interlink
Ei141 / Ei168RC141RC Mains Powered Ionisation Alarm - 9V Alkaline Hardwire Interlink
Ei144 / Ei168RC144RC Mains Powered Heat Alarm - 9V Alkaline Hardwire Interlink
Ei146 / Ei168RC146RC Mains Powered Optical Smoke Alarm - 9V Alkaline Hardwire Interlink

Carbon Monoxide Alarms

Model Number
Type of unit
Type of interlink
Ei3018 / Ei3018RF Mains Powered Carbon Monoxide Alarm - Sealed Lithium Hardwire Interlink
Ei3028 / Ei3028RF Mains Powered Heat & Carbon Monoxide Alarm - Sealed Lithium Hardwire Interlink
Ei261 Mains Powered Carbon Monoxide Alarm - Sealed Lithium Hardwire Interlink

Ancillary Products

Model Number
Type of unit
Type of interlink
MCP401RC Mains Powered Manual Call Point Hardwire Interlink
Ei1529RC Mains Powered Locate, Silence & Test Control Switch Hardwire Interlink
Ei159 Mains Powered Smoke Alarm Locator Switch Hardware Interlink
Ei128R Mains Powered 5A Relay Module Hardwire Interlink
Ei128RBU Mains Powered 5A Relay Module with Lithium Backup Battery Hardwire Interlink
Y03 Mains Powered Multi Frequency Sounder Hardwire Interlink (via relay)
SAB300C Mains Powered Flashing Xenon Strobe (Clear) Hardwire Interlink (via relay)
SAB300R Mains Powered Flashing Xenon Strobe (Red) Hardwire Interlink (via relay)

Wiring Explained

Mains powered Ei Electronics smoke and heat alarms require a 230V AC power supply and up to 12 alarms can be hardwire interlinked in one system.

To obtain a mains power supply, each alarm can be connected to the nearest lighting circuit using 2 core and earth cable with a separate, dedicated interlink cable connecting all alarms. However, if possible it is recommended that the alarms are all powered from a dedicated circuit from the distribution board using 3 core and earth cable for safety during maintenance, as the interlink cable will carry power from live alarms on other power circuits. Please see the diagram below:-

Wiring Mains Powered Alarms

Technical Data
Product Code EI2110E
Alternative Product Codes Ei2110, Ei2110e
Brand EI Electronics
Back-Up Battery

Self-Charging Lithium

Dimensions (HxDia)

152x50mm

Operating Temperature

0°C to 40°C

Relative Humidity

15% to 95%

Sound Output

85dB

Warranty

5 Years

Weight 0.32kg
Product Datasheets

Pricing & Availability

Model Stock Price
Product Code: EI2110E Stock Level:
More than 20 in stock Expected dispatch: Today
Price:

£61.43 inc VAT

£51.19 ex VAT

Delivery Options

The following delivery options are available on this product.

Economy Delivery

£4.79 inc VAT - Orders will be delivered in 3-5 working days by Hermes

Express Delivery

£7.91 inc VAT - Orders will be delivered in 1-2 working days by Hermes

Customer Reviews

4 customers have given this product an overall rating of 4.8 out of 5

Reviews by real customers

All of our product reviews are written by real customers that have purchased this product from us and are published without modification.

Rating: 5 / 5 Stars

Reviewed by: J K

Very easy to install

Published on: 14th August 2018

Rating: 5 / 5 Stars

Reviewed by: M R

High quality, looks good, no nuisance alarms.

Published on: 28th November 2017

Rating: 5 / 5 Stars

Reviewed by: S T

Good looking, easy-to-install product.

Published on: 27th August 2017

Rating: 4 / 5 Stars

Reviewed by: A G

Good product no issues.

Published on: 28th July 2017

Looking for more information?

If you have any questions or would like more information about this product you can ask one of our specialists.

Live Chat Available Now
Direct Telephone 01507 464181