- Home
- Products
- Contact
-
Support
Quick Delivery From £4.99 inc VAT Secure Payments with our fast checkout Live Customer Chat Available Now Total Peace of Mind 30 day returns policy 5 Star Customer Feedback
10 Year Life Radio-Interlinked Carbon Monoxide Alarm with Digital Display - Ei208DWRF
VideosWhere to install a carbon monoxide (CO) alarm - 01:26 An introduction to the range of carbon monoxide alarms - 01:16
Discontinued Product
This product has been discontinued.
Product OverviewInterlinkThe Ei208DWRF is a carbon monoxide alarm featuring radio-interlink technology allowing it to communicate with other compatible alarms and accessories (including RF smoke and heat alarms, the Ei412 RF control switch and the Ei450 wireless alarm controller). Unlike other alarms, this unit features a ‘low volume test’ which allows the alarm to be tested without sounding at its full 85dB. These modern and stylish alarms also have a flat base which allows it to be free standing as well as wall or ceiling mounted, along with a digital display that will display current levels of CO in the atmosphere. The Ei208DWRF has a 5 year warranty and is powered by a long life lithium battery with a 10 year lifespan.
- Lithium battery that lasts full life of alarm (10 years)
- CE marked and Kitemarked to BS EN 50291-1 (domestic use) & BS EN 50291-2:2010 (camping/caravans/boats)
- Loud distinct alarm (85dB at 3 metres)
- LED power and alarm status display
- Automatic self diagnostics
- The unit checks the CO concentration every 50 seconds
- Detector alarms from: 30ppm (parts per million) CO gas
- Radio-interlink with compatible RF smoke and heat alarms
- Built-in radioLINK repeater function allows for the RF signal to work around obstructions
- Compatible with the Ei412 control switch and the Ei450 wireless alarm controller
- Low volume test button
- Hush button
- Tamper-proof facility
- 5 year warranty
- Attractive slimline casing
- Suitable for free standing table top placement or wall/ceiling mounting
- Supplied with fixings; 2 x screws and 2 x rawl plugs
- Manufactured in Republic of Ireland
- This alarm is also suitable for both the Welsh and Scottish updated 2022 legislation
Technical DataThe table below shows all the units that can interlink with the Ei208DWRF.
Compatible AlarmsModel NumberType of unitType of interlinkEi650RF Battery powered optical alarm Radio-interlinked EI603TYCRF Battery powered heat alarm Radio-interlinked Ei168RC/Ei161RC Mains powered ionisation alarm (Lithium back up) Radio-interlinked using the Ei168RC base Ei168RC/Ei164RC Mains powered heat alarm (Lithium back up) Radio-interlinked using the Ei168RC base Ei168RC/Ei166RC Mains powered optical alarm (Lithium back up) Radio-interlinked using the Ei168RC base Ei168RC/Ei2110 Mains powered multi sensor alarm (Lithium back up) Radio-interlinked using the Ei168RC base Ei168RC/141RC Mains powered ionisation alarm (Alkaline back up) Radio-interlinked using the Ei168RC base Ei168RC/144RC Mains powered heat alarm (Alkaline back up) Radio-interlinked using the Ei168RC base Ei168RC/146RC Mains powered optical alarm (Alkaline back up) Radio-interlinked using the Ei168RC base Ancillary ProductsModel NumberType of unitType of interlinkEi412 Wireless Fire and CO Alarm Control Switch Radio-interlinked Ei450 Wireless Fire and CO Alarm Controller Radio-interlinked FAQs (4)Product Code EI208DWRF Brand EI Electronics Battery Type 10 Year Sealed Lithium
Dimensions (HxWxD) 120x105x40mm
Display LED Indicators
Operating Temperature -10°C to 40°C
Relative Humidity 15% to 95%
Sensitivity 30ppm (parts per million) CO gas
Sound Output 85dB
Warranty 5 Years
Weight 0.30kg Product Datasheets Q. Where more than one radio-interlinked battery operated smoke alarm is installed, if the battery in one alarm failed would the other alarms be affected?A.If one alarm was to malfunction the other units would not be affected, if it was due to alarm failure. If the fault was with the radio-interlinking signal, then all alarms that are in the chain after the faulty alarm would be affected and they would not go off.
Q. Can the Ei600RF series be connected with a CO detector?A.Yes, the Ei208WRF CO detector is suitable and we recommend that you also install a Ei412 locator switch to allow you to find out if an alarm was caused by CO gas or by a fire.
Q. Can the Ei160 RF series be connected to a CO detector?A.Yes, you can use either the battery powered Ei208WRF CO detector or the mains powered Ei262 CO detector. We also recommend that you fit a Ei412 locator switch to allow you to find out if an alarm was caused by CO gas or a fire!
Q. Please could you explain how the repeater function works on the Aico/Ei radio interlinked detectors.A.Hello. The radioLINK repeater function allows the smoke alarm to "repeat" the radio frequency signal around obstructions. This stops the signal from becoming blocked and ensures that all interlinked alarms can be reached. This repeater function is built-in to the the Ei168RC radioLINK base (with Ei140, Ei160 or Ei2110 alarm), the Ei600 series of radio interlinked battery powered smoke and heat alarms as well as the Ei262 and Ei208WRF carbon monoxide alarms as standard. When house coded, the system works itself out which alarms are to act as repeaters - it's not something you set up yourself.
Approved Partner
Customer Reviews
16 customers have given this product an overall rating of 4.7 out of 5
Reviews by real customers
All of our product reviews are written by real customers that have purchased this product from us and are published without modification.Rating: 5 / 5 Stars
Reviewed by:
Very good product and easy to install and link to other units
Published on: 3rd January 2019
Rating: 5 / 5 Stars
Reviewed by:
Radio Interlinked is it's best selling point
Published on: 25th August 2017
Rating: 4 / 5 Stars
Reviewed by:
Easy to instal Fortunately I've not used it yet
Published on: 3rd June 2016
Rating: 5 / 5 Stars
Reviewed by:
Ditto.
Published on: 8th May 2016
Rating: 4 / 5 Stars
Reviewed by:
Easy to fit, radio linked together with smoke & heat alarms fairly easy
Published on: 14th October 2015
Rating: 5 / 5 Stars
Reviewed by:
Easy to link to smoke detectors
Published on: 19th July 2015
Rating: 5 / 5 Stars
Reviewed by:
Good product, efficient ordering and delivery service. Value for money. Thank you.
Published on: 12th February 2015
Rating: 4 / 5 Stars
Reviewed by:
Easy to install
Published on: 12th February 2015
Rating: 5 / 5 Stars
Reviewed by:
Quick testing of system
Published on: 27th January 2015
Show MoreRating: 5 / 5 Stars
Reviewed by:
All that was needed to give complete safety system. An excellent unit, installed and linked to smoke and heat alarm kit gives us full protection.
Published on: 17th January 2015
Related Products
![/templates_safelincs/shopimages/products/high/remote-locate-silence-test-control-switch-ei1529rc_thumb_210.jpg]()
230V Remote Locate, Silence and Test Control Switch - Ei1529RC
5 out of 5 stars£36.83 inc VAT
£30.69 ex VAT
Looking for more information?
If you have any questions or would like more information about this product you can ask one of our specialists.
Live Chat Available NowDirect Telephone 01507 464182
