10 Year Sealed Lithium Battery Heat & Optical Smoke Alarms - Ei600 Series - Safelincs - Approved supplier for Ei Electronics
Basket (0) Checkout
FREEPHONE 0800 612 6254 Now FREE from UK mobiles

10 Year Sealed Lithium Battery Heat & Optical Smoke Alarms - Ei600 Series

£123.83 inc VAT
£103.19 ex VAT
Product Overview

The Ei600RF series of battery powered smoke and heat alarms are ideal for properties where the installation of mains powered alarms would cause unnecessary mess and disruption. The built-in RadioLINK+ modules allow wireless connection between all the linked alarms in your property including many other Aico and Ei Electronics products, helping to ensure all building occupants are are given the earliest possible warning of a potential fire.

  • RadioLINK+ wireless technology built in
  • 10 year sealed lithium battery life – you never have to change batteries
  • Ideal for extensions and newly decorated properties
  • Requires no cables between units and no mains power supply
  • Up to 12 RadioLINK or RadioLINK+ Ei Electronics products can be interlinked
  • RF range: 100 metres in free space and up to 30 metres in buildings
  • Suitable for installations complying to BS 5839-6: 2013 Grade F.
  • Digitally coded to avoid interference with neighbouring systems
  • Optical version VdS approved to BS EN 14604:2005 and CE marked
  • RadioLINK+ repeater function allows for the RF signal to work around obstructions
  • Can be used with manual break points and control switches
  • Features test and hush button
  • Made by Ei Electronics in Ireland
  • 5 year warranty

Please Note: These units use the radio-interlink frequency 868.499MHz. This bandwidth is restricted for safety products, therefore the chances of interference should be limited.

Interlink

The table below shows all the units that can interlink with the EI600RF series.

Alarms from the Same Series
Model Number
Type of unit
Type of interlink
Ei650RF Battery powered optical alarm Radio-interlinked
Ei603RF Battery powered heat alarm Radio-interlinked
Compatible Alarms
Model Number
Type of unit
Type of interlink
Ei161eRF Ionisation Smoke Alarm Radio-interlinked using the Ei100MRF module
Ei164eRF Heat Alarm Radio-interlinked using the Ei100MRF module
Ei166eRF Optical Smoke Alarm Radio-interlinked using the Ei100MRF module
Ei2110eRF Multi Sensor Smoke & Heat Alarm Radio-interlinked using the Ei100MRF module
Ei168RC/141RC Mains powered ionisation alarm (Alkaline back up) Radio-interlinked using the Ei168RC base
Ei168RC/144RC Mains powered heat alarm (Alkaline back up) Radio-interlinked using the Ei168RC base
Ei168RC/146RC Mains powered optical alarm (Alkaline back up) Radio-interlinked using the Ei168RC base
Carbon Monoxide Alarms
Model Number
Type of unit
Type of interlink
Ei208WRF Battery powered CO detector Radio-interlinked
Ei262 Mains powered CO detector Radio-interlinked
Ancillary Products
Model Number
Type of unit
Type of interlink
Ei407 Wireless Manual Call Point Radio-interlinked
Ei411H Wireless Locate, Hush and Remote test switch Radio-interlinked
Ei412 Wireless Fire and CO Alarm Control Switch Radio-interlinked
Ei450 Wireless Fire and CO Alarm Controller Radio-interlinked
Technical Data

Technical Data

This is the technical data for the 10 Year Sealed Lithium Battery Heat & Optical Smoke Alarms - Ei600 Series.

Sensor Type Ei650RF: Optical Smoke Sensor
Ei603RF: Thermistor - activates at 58°C
Dimensions (HxDia) Ei650RF: 50x115mm
Ei603RF: 55x115mm
Battery Type Sealed 10 Year Lithium
Sound Output 85dBA at 3 meters
Radio Linking Frequency 868.499MHz
Radio-Frequency Range Clear Line of Sight: 100m
Typical Property: 30m
Temperature Range Operating: 0°C to +40°C
Storage: 0°C to +35°C
Humidity Range 15% to 95% Relative Humidity

Product Datasheets

The following datasheets are available for this product.

FAQs (12)

Q. Please could you explain how the repeater function works on the Aico/Ei radio interlinked detectors.

A. Hello. The radioLINK repeater function allows the smoke alarm to "repeat" the radio frequency signal around obstructions. This stops the signal from becoming blocked and ensures that all interlinked alarms can be reached. This repeater function is built-in to the the Ei168RC radioLINK base (with Ei140, Ei160 or Ei2110 alarm), the Ei600 series of radio interlinked battery powered smoke and heat alarms as well as the Ei262 and Ei208WRF carbon monoxide alarms as standard. When house coded, the system works itself out which alarms are to act as repeaters - it's not something you set up yourself.

Q. Does this alarm conform to BS 5446 part 1 as recommended by the Fire Service?

A. BS 5446-1:2000 was withdrawn in 2008 and replaced by BS EN 14604:2005 to conform with European standards. These alarms are fully compliant with BS EN 14604:2005.

Q. Can the Ei600RF series be connected with a CO detector?

A. Yes, the Ei208WRF CO detector is suitable and we recommend that you also install a Ei412 locator switch to allow you to find out if an alarm was caused by CO gas or by a fire.

Q. What is the difference between Ei3100RF radio-interlinked smoke alarm series and the Ei600 series of radio-interlinked smoke alarms? Why does one cost much more than the other?

A. The EI600RF series are a later model and on top of all the features that the Ei3100RF offers, the series has the possibility to use the locate feature in the control switch, making the product more similar to a BS5839 part 6 Grade A alarm system. Additionally, the Ei600 series smoke alarms are offered with a true ten year life sealed lithium battery which makes the alarms acceptable in most circumstances as a BS5839 part 6 Grade D fire alarm system. This offers a substantial saving to customers, as it replaces the need for an electrician installing mains powered alarms.

Q. If the radio interlinking signal on one unit fails will the units still work as stand alone units.

A. Yes, should the radio interlinking signal fail the units will continue to sound independently should they detect a fire.

Show all FAQs

Pricing & Availability

Model Stock Price Weight
Ei650RF - Optical Smoke Alarm
Product Code: EI650RF
Stock Level:
Available to order Expected dispatch: 2nd Sep
Price:

£123.83 inc VAT

£103.19 ex VAT

Weight:
0.264kg
Ei603RF - Heat Alarm
Product Code: EI603RF
Stock Level:
Available to order Expected dispatch: 2nd Sep
Price:

£131.03 inc VAT

£109.19 ex VAT

Weight:
0.277kg

Delivery Options

The following delivery options are available on this product.

Economy Delivery

Delivered in 17-19 working days by Royal Mail £4.68 inc VAT

Expedited Delivery

Delivered in 15-15 working days by UK Mail £7.80 inc VAT

Self-adhesive sticker pads for smoke and heat alarms

Play Video
Run Time: 00:58

How to test your smoke and heat alarms

Play Video
Run Time: 00:33

Looking for more information?

If you have any questions or would like more information about this product you can ask one of our specialists.

Direct Telephone 01507 464181
Direct Email Email Now

Cookies

Close

This site uses cookies to improve your experience and for essential functioning of the site. By continuing to use our site you agree to the use of cookies.

Change your cookie settings at any time by clicking on the button at the bottom of each page. Read more about the cookies we use in our Privacy Policy.

By continuing to browse this site you agree to the use of cookies. Learn more.