The easichange® Ei164EK replacement head kit has been specifically designed to allow an Ei164, Ei164RC or Ei164e heat alarm head (the main and most visible part of the smoke alarm containing the sensor and the electronics) to be replaced at the end of its life without the need of an electrician. The kit is a genuine Ei Electronics product and contains the alarm head, a removal tool and the simple guidance required to quickly and safely replace your heat alarm head. The heat alarm base with the wiring is left on the ceiling in this process.
The simple installation process of the easichange® replacements kits negates the need of an electrician.
This is the technical data for the Easichange® Replacement Heat Alarm for Ei164, Ei164RC and Ei164e.
|Alternative Product Codes||Ei164, Ei164RC, Ei164e, Ei164EK|
|Back-Up Battery||Longlife Lithium Battery|
|Sound Output||85dB (minimum) at 3m|
|Temperature Range||0°C to 40°C|
|Maximum Humidity||15% to 95% Relative Humidity|
The following datasheets are available for this product.
Q. Do you supply a tool to remove a mains powered smoke alarm from the base to replace the backup battery and the replacement battery required?
A. Yes, we do sell the Easichange tool separate to the kits. https://www.safelincs.co.uk/easichange-alarm-removal-tool/ We also sell the 9v lithium longlife batteries required for these alarms. http://www.safelincs.co.uk/FDK-Long-Life-Lithium-Battery/
Q. Can I upgrade an existing Ei140 series base with a Ei160 series smoke alarm?
A. Yes, the bases for the Ei140 and Ei160 series are identical units and are interchangeable.
Q. What type of electrical cable is required to carry the mains supply and trigger signal for the wired alarms?
A. For the mains supply of the first unit a 2-core earth cable would be sufficient. For the connection between the alarms a 3-core earth cable would be required
Q. Which smoke alarms have an auxiliary switched output to activate a remote sounder?
A. The Ei140 series or Ei160 series of detectors can be used with Ei167 remote sounder.
Q. How can we test the alarm to make sure it is working?
A. The manufacturer's recommendation is to test the alarm by pressing the test button. This will simulate a heat input at the heat sensor. You can also test it with a hair dryer but make sure that the hairdryer is kept away at a suitable distance from the alarm. Do not attempt to test the alarm by using open fire or excessive heat as this may damage the unit.
|Product Code: EI164RCEK||
More than 20 in stock Expected dispatch: Tomorrow
£50.15 inc VAT
£41.79 ex VAT
18 customers have rated this product and it has an overall rating of 4.8 out of 5
Reviewed by: EB
It was the a replacement and fitted perfectly
Published on: 24th November 2017
Reviewed by: CR
Exactly what I ordered. Only 1 "removal tool" (i,e, pen screwdriver) supplied between these 2 orders. Did someone pinch the second one?
Published on: 14th November 2016
Reviewed by: TW
Very easy to exchange the sensor Thank you - an excellent product
Published on: 6th September 2016
Reviewed by: SC
Easy solution to annoying problem! Replaced a "smoke" detector that should never have been fitted in kitchen area. Really easy to take out and replace with this new product. No annoyed husband - worth every penny!
Published on: 29th March 2016
Reviewed by: -
Excellent service A phone call expertly dealt with advising just what a needed.
Published on: 1st August 2015
Reviewed by: -
very nice these surveys don't tell much, but I responded to give a positive thanks to the staff who replaced my wrong order efficiently and without charge
Published on: 25th May 2015
The following delivery options are available on this product.
If you have any questions or would like more information about this product you can ask one of our specialists.