Generally, the process for interlinking hardwired alarms is the same. Firstly, you need to make sure that the alarms you are purchasing are compatible with each other, as alarms from different manufacturers (in most cases) do not mix. Dependent on the manufacturer's instructions, you will then be advised to use either a length of bell wire / twin cable to serve as an interlink cable, or 3-core and earth (which is usually adopted in newer installations).
In the same way as interlinking hardwired alarms, it is still crucial to check compatibility between alarms for systems that link wirelessly. The way in which radio-interlinked alarms are connected can differ from brand to brand, however, there will be instructions included with the alarm to guide you through the interlinking process. No signal cables are required between radio-interlinked alarms.
Related videos:
How to radio-interlink the Ei3100RF series smoke alarms
How to radio-interlink the Firehawk W Series smoke and heat alarms
Reviewed: 14/09/2023 (doc:536 V1.0). Our articles are reviewed regularly. However, any changes made to standards or legislation following the review date will not have been considered. Please note that we provide abridged, easy-to-understand guidance. To make detailed decisions about your fire safety provisions, you might require further advice or need to consult the full standards and legislation.
