Sigma Smart+Shield Emergency Exit Alarm

Smart+Shield for All Doors - ECSG960

The base model of the Smart+Shield is designed to be usable on all doors. It can be installed in the door frame - flush with the door leaf - or on the door leaf itself, as well as externally from the door via optional Cable Reed Contacts. When the monitored door is opened the alarm will sound, until it is reset either by the integrated key switch or by the configured auto-silence timer.

Kit Contents:

• Smart+Shield alarm with battery
• 7x wall screws, 2x case screws
• 2x Reset Key
• Fluorescent STOP Sticker
• Installation Guide
• Reed Housing
• Extra screws
• Magnetic bar

Smart+Shield for Vertical Panic Bolts - ECSG961

Designed for installation on a vertical panic bolt, such as the Exidor 294 or Briton 372, this model is connected directly to the door's locking mechanism and as such will be an extremely effective visual deterrent. The Smart+Shield for Vertical Panic Bolts will alarm when the locking mechanism is disengaged, rather than when the door is actually opened, until reset.

Kit Contents:

• Smart+Shield alarm with battery
• 7x wall screws, 2x case screws
• 2x Reset Key
• Fluorescent STOP Sticker
• Installation Guide
• Magnetic Plate with adhesive pad

Smart+Shield for Panic Bars - ECSG950

With the included Trigger Angle designed for Panic Bars, such as the Exidor 296 or Briton 378, not only will this model sound when the door's locking mechanism is disengaged, it also features a pre-alarm unlike the previous two models. When correctly installed, the Trigger Angle will detect slight movement in the Panic Bar and sound a temporary alarm which automatically resets when the Panic Bar is released without opening the door. If the Panic Bar is fully depressed and the lock disengaged, the full alarm will sound until reset.

Kit Contents:

• Smart+Shield alarm with battery
• 7x wall screws, 2x case screws
• 2x Reset Key
• Fluorescent STOP Sticker
• Installation Guide
• 1x Trigger Angle for Panic Bars
• 2x Red plastic Spacer Plates

Smart+Shield for Touch Bars - ECSG955

Similar to the Smart+Shield for Panic Bars, this model features a Trigger Angle specifically designed for use with Touch Bar locking mechanisms, such as the Exidor 400 or Briton 571. When slight pressure is put on the Touch Bar, a self-resetting pre-alarm will sound to deter improper use of the emergency exit, which will change to a full alarm if the Touch Bar is fully depressed. As with all models, the full alarm can be reset via the integrated key switch or by a configurable 30 or 180 second auto-silence feature.

Kit Contents:

• Smart+Shield alarm with battery
• 7x wall screws, 2x case screws
• 2x Reset Key
• Fluorescent STOP Sticker
• Installation Guide
• 1x Trigger Angle for Touch Bars
• Magnetic Plate with adhesive pad
• 6x Red plastic Spacer Plates

Technical Data

This is the technical data for the Sigma Smart+Shield Emergency Exit Alarm.

Product Datasheets

The following datasheets are available for this product.

• Sigma Smart+Shield