Self-adhesive wall mounting kits can be used to fit signage without the use of glue or screws. The double-sided adhesive pads supplied can be used with all non-adhesive backed signs on most types of wall (not suitable for artex).
10 pads supplied
One kit is suitable for approximately two signs
For use on most walls (not suitable for artex)
CAUTION: To achieve optimum performance, care must be taken to prepare the surface
Our self-adhesive sticker pads are designed to permanently hold your sign in place. However, to ensure optimum performance, the surface to which the sign will be fixed must be properly prepared and suitably stable. The area where the sticker pads will be fixed must be flat, clean and free from dust. Attempting to fix your sign to a dusty or rough surface will not work as the adhesive will not be able to get a good purchase on the substrate.
Walls are often finished with matt (non-shiny) emulsion paint. Therefore, our sticker pads have been designed with this fact in mind. If your wall is painted with anything other than matt emulsion, it may be necessary to lightly abrade the surface (making sure to remove any residual dust) prior to installing your sticker pad.
To ensure your self-adhesive sticker pads have fully secured your sign, take the following steps:
Ensure the surface is smooth (e.g. no loose paint or textured finishes)
Gently sand any shiny surfaces
Ensure the surface is clean and free from dust or chemicals
Follow the instructions provided, pressing the pad to the sign first and then the wall for a minimum of 20-30 seconds each
This site uses cookies to improve your experience and for essential functioning of the site. By continuing to use our site you agree to the use of cookies.
Change your cookie settings at any time by clicking on the button at the bottom of each page. Read more about the cookies we use in our Privacy Policy.
By continuing to browse this site you agree to the use of cookies. Read our privacy policy to learn more.