The hammer and chain is an essential component of the Redlam panic bolt. The hammer is used to break the fitted tube, which allows the bolt to retract and the door to release. Hammer and chains can be purchased separately to replace those which have been misplaced or just to keep as a spare.
- Designed for use with the Redlam MK1 and MK2 panic bolts
- The chain and handle allow for sufficient holding during use
- Used to break ceramic and glass tubes fitted in the bolt
- Easy to use and install
The table below shows the emergency bolts that are suitable for use with the replacement hammer and chain.
||Type of Unit
||Redlam Panic Bolt - MK1 and MK2
This is the technical data for the Replacement Hammer and Chain for Panic Bolt - Redlam.
Q. Which panic bolt is suitable to use on an external gate?
The Kingpin emergency bolt, which is available with a stainless steel bolt and is powder coated can be used externally.
Q. Can a panic bolt be fitted with a push pad to an emergency exit door for extra security?
No,a panic bolt should not be fitted to an emergency exit already fitted with a push pad device, as in an emergency situation both devices would have to be operated to open the door which could result in confusion. For extra security an alarm device such as the exit stopper door alarm can be fitted. This device is fitted to the door and when the push pad is used and the door opens the alarm sounds to signal that the emergency exit has been opened.
Q. Does the Redlam Panic Bolt meet the requirements of BS EN 1125 ?
Q. Can glass panic bolts still be used?