Mailsafe Wall Mounted Anti-Arson Mailbox

Mailsafe Anti-Arson letterboxes are the solution to the ever increasing crime of arson. Mailsafe will contain, detect and extinguish a fire in less than 15 seconds, before it has the chance to spread. Discretely placed within the letterbox is the Mailsafe Fire Extinguishing System. The fire extinguisher activates automatically when a fire raises the internal temperature of the letterbox. The Mailsafe extinguisher is a sealed thermosensitive polymer tube filled with the ozone friendly extinguishant FE-25. Mailsafe is simple to fit and has been designed to be fitted against the back of a standard letter plate.

The Mailsafe has been tested by Warrington Fire Research to determine the performance, when exposed to a series of ignition sources, each of which was designed to represent a potential method of arson attack.
The tests demonstrate that the 'Mailsafe' mailbox can successfully contain an arson attack and can provide significant protection against a serious fire developing within a building. If the mailbox had not been present, all of the potential arson attacks considered in the series of tests could have caused ignition of the contents behind the door (e.g. ignition of a floorcovering) and could have caused a major fire to develop.

Technical Data

This is the technical data for the Mailsafe Wall Mounted Anti-Arson Mailbox.

Q. Just looking at the Mailsafe Anti-Arson Mailbox with extinguisher. The description says comes supplied with an optional anti-theft baffle to stop theft through the letterbox. Doe this mean this stops people putting their hand in your mailbox and stealing the mail?

A. Yes, the anti-theft baffle is designed to help prevent people from the outside stealing your mail either by hand or with a theft device.

Q. Is there a restriction to the type of wall that the wall mounted anti-arson mailbox can be fixed to please?

A. The wall mounted anti-arson mailbox is supplied with fixings suitable for a standard brick wall. If you require the mailbox to be fitted to a non-brick wall, you would just need to change the screws so that they are suitable for your wall requirements.