CALL OUR TEAM NOW 0800 612 6537 Lines open today 8am - 6pm

7 Year Life Digital Display Carbon Monoxide Alarm - FireAngel CO-9D

Discontinued Product

This product has been discontinued.

alternative product

UltraFire UBCO1D Digital Carbon Monoxide Alarm

  • Product Life: 10 years
  • Battery: 2 x AA batteries included
  • Warranty: 10 years
  • Digital display screen for CO readings and alarm status
  • CE marked and UKCA marked
  • Certified to BS EN 50291-1 for domestic use
  • Also suitable for the 2022 Welsh legislation

£13.80 inc VAT

£11.50 ex VAT

View Product
Product Overview

The FireAngel CO-9D is a digital display carbon monoxide alarm fitted with a tamper-proof sealed 7 year life battery. The clear LCD digital display allows you to see CO levels as low as 10ppm as well as peak readings that have been recorded over the previous 4 weeks. The CO-9D detector is easy to wall mount or can be left free standing, making it an ideal portable device for taking on holiday.

  • Product Life: 7 years
  • Battery: sealed lithium battery
  • Warranty: 1 year warranty
  • Designed for wall mounting with simple installation
  • CE marked and Kitemarked to BS EN 50291-1 (domestic use) BS EN 50291-2 (camping, caravanning and travel)
  • Large, easy to use test button
  • Displays CO levels from 10ppm
  • Activates into alarm mode when CO level reaches 50ppm
  • Sound output: 85dB
  • Enables users to carry out a practical sensor test
  • Integrated thermometer function displays the room temperature
  • Automatic self diagnostic check tests its own sensor and battery
  • Suitable for wall mounting or free standing
  • Displays peak level readings recorded over the last 4 weeks
  • Supplied with fixings; 2 x screws and 2 x rawl plugs
  • This alarm is also suitable for both the Welsh and Scottish updated 2022 legislation

Please Note: The FireAngel CO-9D is not suitable for use in boats.

Technical Data
Product Code FACO9D
Alternative Product Codes CO-9D, CO9D, CO9DQ
Brand FireAngel
Battery Type

7 Year Sealed Lithium

Dimensions (HxWxD)

74x125x40mm

Display

Digital Display

Operating Temperature

-10°C to +40°C

Relative Humidity

30% to 90%

Sensitivity

Digital Display Reading: 10ppm (parts per million)

Warning Alarm: 50ppm (parts per million)

Sound Output

85dB

Warranty

1 years

Weight 0.18kg
Product Datasheets
FAQs (4)
Q. What are the regulations to testing CO detectors? Do I need to use test gas?
A.

There is no legal or BSI requirement to test the CO detectors with a test gas. A weekly check with the test button is fully sufficient if you choose a quality CO detector. The test gas is offered as a 'belts and braces' option.

Q. Is this CO Detector compliant with all relevant standards to allow me to place it in a tenanted property as I am a landlord?
A.

Yes, this CO alarm has been Kitemarked to EN 50291-1: 2010 and has been awarded a CE mark. It should be installed in line with the manufacturers guidance.

Q. Where should I install my carbon monoxide alarms?
A.

CO detectors should be installed near potential sources of carbon monoxide, essentially any fuel-burning appliances such as boilers, cookers and ovens, fireplaces (both open and enclosed burners), and portable generators. As you are likely to be most affected by CO in areas of your home that you spend the most time in it is advisable to install alarms in those areas as well, such as the living room and bedrooms. It is also worth noting that while one detector is better than no detectors at all, larger homes may require several detectors to cover the property fully.

Also note that carbon monoxide has been proven to spread into neighbouring properties through open windows and, in semi-detached or terrace houses, through loft spaces. If your property has an attached garage with a connecting door through to the house, it is recommended to fit a CO alarm inside the house leading from that doorway.

Battery powered carbon monoxide alarms can typically be installed wall-mounted or left free-standing on flat, level surface.

  • Near an appliance: they should be placed within 1 to 3 metres horizontally from the appliance and between the height of the appliance to 150mm below the ceiling – i.e., not above a stove where it would be in the path of steam or fumes.
  • In living spaces: they should be positioned close to where the occupant's head is likely to be most of the time – e.g., on your bedside table.

Combined smoke & CO alarms or mains-powered CO alarms are typically installed on the ceiling and should be at least 30cm away from any wall, light fitting, or other obstruction.

Do not install CO alarms within 3 metres of doors or windows, above radiators, or immediately close to anything that gives off steam or fumes like a cooker or shower room. Similarly, it is not recommended to install detectors in dusty areas such as workshops or garages.

For more information, please check the manufacturer's instructions – you can download the PDF manual from the relevant product page on our site. You can also watch our video guide to positioning CO detectors.

Q. Where are carbon monoxide alarms required?
A.

Most legislation advises at least one carbon monoxide alarm is fitted near new or replacement fuel-burning appliances that are fixed installations, though rented properties (both social and private sector) often require CO alarms be provided by landlords even if no appliances are being installed or replaced. Examples include boilers, coal fires, wood burners, and gas ovens and cookers, though an exception is often made in legislation for gas appliances solely used for cooking.

However, any and all materials can give off CO when burning, including gas cookers. Carbon monoxide can also spread from neighbouring properties or outside sources such as vehicle fumes. Because of this, Safelincs strongly recommends the installation of carbon monoxide detectors in every home, and also at head-height in bedrooms to protect occupants while sleeping.

Landlords, please see our pages for English, Welsh, and Scottish alarms or our landlord guidance page for more information.

Key Product Features

Easy-to-use test/mode button is clearly marked

Powered by a sealed 7-year long life battery

The LCD display shows CO levels as low as 10ppm

Includes screws and rawl plugs for installation

What's Included?

Every FireAngel FACO9D is supplied with the following components.

  • 1 x FireAngel CO-9D carbon monoxide alarm
  • 1 x Sealed 7-year lithium battery
  • 2 x Screws & rawl plugs
  • 1 x Instruction manual

Customer Reviews

295 customers have given this product an overall rating of 4.8 out of 5

Reviews by real customers

All of our product reviews are written by real customers that have purchased this product from us and are published without modification.

Rating: 4 / 5 Stars

Reviewed by: J S

Functional and looks great

Published on: 23rd July 2022

Rating: 5 / 5 Stars

Reviewed by: J M

Very efficient and accurate readings.

Published on: 22nd July 2022

Rating: 5 / 5 Stars

Reviewed by: h s

Simple and effective Easy to install

Published on: 17th July 2022

Show More

Looking for more information?

If you have any questions or would like more information about this product you can ask one of our specialists.

Live Chat Available Now
Direct Telephone 01507 464182

Settings

Colour Scheme

Light
Dark

Pricing Display

Inc VAT
Ex VAT

Cookies

By continuing to browse this site you agree to the use of cookies.