Some premises pride themselves on their clean, modern interiors that make the building's users feel relaxed or engaged – but traditional bulkheads can be an eyesore. Thankfully, not all emergency lights are created equal and there are many stylish options to choose from these days, even for environments that require IP65 ratings. This selection of Safelincs' emergency lights places just as much importance on design as it does on function, including unobtrusive recessed lighting and modern edge-lit exit signs that can complement any interior design.
The Meled is available in a choice of three power outputs to suit almost any need, and their LED technology provides brighter, clearer light compared to fluorescent emergency lights.
Providing 300 lumens of emergency light for 3 hours, this spotlight is non-maintained in operation and can be fitted flush with your ceiling.
One of the smallest ceiling mountable recessed LED emergency downlights available, the Dyode provides high light output and achieves a lifespan of over 50,000 hours.
Suitable for ceiling mounting and with 4 directional arrow legends to choose from the stylish Romney single-sided hanging emergency fire exit sign uses LED technology to give it extended life.
Designed for ceiling mounting along corridors that form part of the escape route, the Romney double sided hanging LED fire exit sign has three directional arrows to choose from.
The ceiling mountable Calabor 8W recessed emergency lighting bulkhead light slave unit, with a thin front trim plate and prismatic diffuser, provides a low-profile and stylish finish suitable for indoor use.
With a fully recessed design, the ceiling mountable Calabor LED emergency bulkhead provides a stylish lighting solution with a greater lamp lifetime and reduced power consumption compared to standard units.
The Dyode emergency downlight features a digital self-test function, meaning it is capable of performing its own self-checks at regular intervals and provides visual warning if a fault is found.
Suitable for maintained or non-maintained operation, the ceiling mountable Calabor fully recessed LED fire exit sign will provide 3 hours of emergency illumination.
A fully recessed double sided LED fire exit sign, suitable for ceiling mounting with 3 directional arrows to choose from. The Calabor is ideal for identifying the emergency escape route.
Suitable for ceiling mounting and with built-in self-test the Romney single sided hanging LED fire exit sign will perform regular self-checks and provide a visual indication of any issues.
The Romney double-sided hanging fire exit sign uses high performance, energy saving LEDs with a 50,000 hour lifespan, with digital self-test that simulates its own mains power failure.
With the same features as the 8W Calabor emergency lighting bulkhead light with self-test, this version also gives you high performance energy saving LEDs with an approximate lamp life of 50,000 hours.
The Arrian slave emergency light is designed to be low-profile, with an aluminium body that seemlessly blends into modern office environments. Available for 24V, 50V, 110V, and 230V input and provides over 770 emergency lumen output.
Suitable for maintained or non-maintained operation, the Calabor fully recessed LED fire exit sign with self-test function performs regular self-checks and provides a visual indication of any faults.
With digital self-test, the Calabor double-sided recessed LED fire exit sign will automatically perform self-checks by simulating its own mains power failure saving time on manually checking devices.
The Arrian self-contained LED emergency lighting panel for suspended ceilings can be configured for either maintained or non-maintained operation with a choice of emergency lumen outputs.
Available in a range of voltages, the Calabor single-sided 8W fire exit sign slave unit obtains its emergency back-up power supply from a separate central battery system located within the building.
This product is temporarily unavailable.
This product is temporarily unavailable.
The Calabor double sided 8W fire exit sign slave units are powered by a bank of larger batteries centrally located within a building. Available with a choice of 3 directional arrow legends.
This product is temporarily unavailable.
This product is temporarily unavailable.
Designed to help save time when manually testing emergency lighting, the digital self-test feature enables the bulkhead to simulate a power failure, giving visual indication if there is a fault.
This product is temporarily unavailable.
This product is temporarily unavailable.