Double 60 Minute Fire Door with Oak Veneer and 450x450mm square glass pane

Please choose which fire rating you require. We offer fire doors with ratings of either 30 minutes (FD30) or 60 minutes (FD60) fire protection as standard. All of our fire doors are BWF-Certifire certified and are supplied complete with certification and fire door markings on the top of the doors themselves. If you require a door with a higher fire rating, please call our dedicated fire door team 0800 612 4837.

Please select whether you require a frame with your fire door. We offer fire doors leaves on their own or as a door set complete with made-to-measure fire rated frame, smoke seals and architraves. Please note: Fire door frames are supplied plain (not primed) as standard but can be upgraded to match your chosen fire door finish. Our fire door sets can be installed as inwards or outwards opening. To avoid transport damage our frames are supplied in kit form, not assembled.

Please choose the style of architrave you would like. we have a choice of two styles available (18x44mm). We will supply the appropriate lengths of architrave for both push and pull sides of your single or double fire door. As standard our architrave will be supplied factory primed ready to be painted on-site.

Please choose if you require a single, double or door and a half fire door. We offer single fire door leafs and double door sets or door and a half door sets with square or rebated meeting stiles. If you choose a double door set or a door and a half door set with a veneer finish you will be asked if you would like your doors pair matched.

Please choose what type of meeting stiles you would like. Our double door sets can be supplied with square (non-rebated) or rebated meeting stiles with left or right handed leading leafs.

All we need to know is the size of the opening in your wall where the frame will be fitted. The dimensions you provide should be the size of the actual opening in your wall (without the existing frame), we will then provide you with a frame to fit this opening and 2 doors to fit inside the frame we supply.

What measurements do we require?

Please choose which style of fire door you would like. Our fire doors are available as a plain leaf, with raised panels or with various glazing options. All of our glazed fire doors are supplied with fire rated Georgian wired glazing as standard if you choose a glazed fire door you will be given an option to upgrade to plain fire rated glass.

Please choose which type of glazing you would like. All our glass panes are fire rated and as standard are supplied with Georgian wired glass but can be upgraded to Pyrobelite plain glass.

Please choose which finish you would like on your fire door. Our doors can be supplied as a plain door (fully finished plywood/MDF, not primed), factory primed, factory primed and painted as well as offering a range of real wood veneer and coloured formica finishes for you to choose from.

Please choose if you would like your veneers to be pair matched. Our doors are manufactured using real wood veneers and as with all wood there is no guarantee the grain, pattern and shade of your doors will match unless you choose the pair matching option below.

Please choose which finish you would like on your frame. Our frames can be supplied as plain (fully finished plywood/MDF, not primed), factory primed, factory primed and painted as well in a real wood veneer to match the veneer you have chosen on your door.

Please choose if you would like fire rated hinges. If you choose to, we will pre-cut the hinge rebates into the side of your fire door and frame and supply a set of appropriate fire rated hinges and fixings. Please note: To avoid transport damage the hinges will not be fitted to the door or the frame and will be supplied boxed with all the relevant fixings.

Please choose if you would like fire door signs. We can supply your fire door order with metal fire door signs to make sure that your door can be identified as a fire door and ensure that people know it needs to be closed. Please Note: We will supply a sign for each side of you fire door.

Please choose if you would like handles. We can pre-cut the required hole(s) for the latch and / or lock case during the manufacturing process. The lever handles and locks that we use are high quality, durable and can be easily fitted on-site by your installer.

Please choose if you would like an overhead fire door closer to ensure that your fire door closes fully once it has been opened to help limit the spread of fire. We can supply your fire door with an adjustable overhead fire door closer which can be easily fitted and adjusted on-site by your installer.

Please choose if you would like a fire door retainer. A Dorgard will allow you to legally hold your fire doors open and ensure that they are released in the event of a fire. We can supply your fire door with a Dorgard Standard or Dorgard SmartSound which can be easily fitted on-site.

Please choose if you would like a pull handle and push plate. We can supply you with a pull handle, as well as a push plate for the reverse side of your door that can be easily fitted and adjusted on-site by your installer.

Please choose whether you would like us to provide kick plates for your fire door. Kick plates help to protect the bottom of your fire doors when they get kicked open and help to ensure your door will stand up to heavy traffic flow as well as protecting the door itself from knocks from hoovers, barrows etc.

Please choose if you would like a finger guard. Finger guards help to make sure that users cannot trap their fingers between the door and the frame. We will supply a finger guard that can be fitted on-site by your fire door installer.

Please choose if you would like a foot operated door opener. DecaMed foot operated door openers allow doors to be pulled open with your foot reducing the contact points on fire doors and minimising the the spread of harmful germs and bacteria.

Please choose if you would like acoustic seals. We can pre-route out the rebate and supply the drop down seal for the bottom of your fire door during the manufacturing process and supply the appropriate Batwing® acoustic seals. This will give your fire door an acoustic rating of 30dB.