Mains Radio-Interlink Smoke Alarms & Heat Alarms with Alkaline Back-up Battery - Aico Ei140eRF Series

Requiring no cables between the units, the Ei140e series of smoke and heat alarms are supplied with an Ei168RC radio-interlink baseplate as standard. Each alarm requires a mains power feed that can be obtained from the nearest lighting circuit. Once installed and house coded, up to 12 RadioLINK and RadioLINK+ alarms can be interlinked wirelessly by radio signal. With a radio frequency range of up to 30m indoors, the Ei140e smoke and heat alarms are ideal for a range of properties where the mess and cost of interlinking cables would not be suitable.

• 230V mains powered with alkaline back-up battery and radio-frequency baseplate
• Suitable for installations complying to BS 5839-6: 2019 Grade D2
• Made in Ireland with a 5 year warranty
• Two sensor types available:
  • Ei146e smoke alarm suitable for hallways, landings, bedrooms, and living rooms
  • Ei144e heat alarm suitable for kitchens and garages
• Each unit consists of an Ei168RC radio-frequency baseplate and an Ei140e series alarm
• Both alarm and baseplate contain a back-up battery in case of a mains power failure
• Can be powered from the nearest light fitting with a range of up to 30m indoors
• Create a system of up to 12 compatible RadioLINK and RadioLINK+ devices
• Built-in RadioLINK repeater function allows the RF signal to work around obstructions
• Test and Hush combination button for easy weekly testing and hassle-free maintenance
• Clear LEDs on baseplate and alarm to show interlink and normal operation
• CE marked, UKCA marked, and Kitemarked
  • Smoke alarm: BS EN 14604: 2005
  • Heat alarm: BS 5446-2: 2003
• This alarm is suitable for both the Welsh and Scottish updated 2022 legislation
• Please note: Alarms are sold separately

Please Note: These units use the radio-interlink frequency 868.499MHz. This bandwidth is restricted for safety products, therefore the chances of interference should be limited.