Consisting of an intelligent heat sensor and a control unit, the Innohome Stove Guard SGK 500 is an innovative safety device that effectively prevents electric cooker fires from starting. Attached to the cooker hood or wall, the intelligent heat sensor assesses the temperature of the cooker top and its rate of rise, identifying when a hazardous situation occurs. On detection of a hazard, the heat sensor wirelessly communicates with the control unit, which in turn cuts off the electricity supply to the cooker. Ideal for a range of applications, the Innohome Stove Guard helps to promote independent living and improve kitchen safety.
- Provides intelligent fire prevention technology
- Monitors cooker top overheating and detects abnormal changes in temperature
- Consists of a heat sensor and a separate control unit:
- Heat sensor attaches to the cooker hood using magnets or to the wall using screws
- Control unit is installed behind the cooker and connected to the electricity
- Suitable for electric cookers only
- Heat sensor wirelessly communicates to the control unit using radio connection
- If a hazard is detected, the heat sensor alarms and the control unit cuts off the electricity supply to the cooker
- Designed to act before a fire is ignited
- Heat sensor intelligently learns the users' cooking styles
- Intelligent timer recognises when the hob has been left on
- Sensor dislocation alarm feature prevents cooker use if the sensor is removed
- Automatic fault diagnosis analyses the heat sensor, control unit and radio connection link
- Recognises when smoke, CO and gas alarms sound and triggers to turn the cooker off
- Heat sensor is powered by solar panels, using a battery for back-up power
- Long 15 year sensor working life
- 5 year warranty
- Supplied with a silver cover as standard
- Control unit output enables connection to a social alarm system such as Telecare
- Promotes independent living and improves kitchen safety
- Ideal for a range of applications including homes for the elderly, people with special needs and student accommodation
the control unit needs to be connected to the cooker and should be installed by a qualified electrician.
This is the technical data for the Innohome Sona Stove Guard - SGK 500.
|Alternative Product Codes
||Heat Sensor: Solar powered with battery back-up
Control Unit SGK500-2: 240-400 VAC
||Heat Sensor: 15 years
||80dB at 100cm
||1 x Heat Sensor
1 x Control Unit
1 x Junction Box
1 x Connection Cable
1 x Installation Bracket
The following datasheets are available for this product.
Q. What's the difference between the Innohome Stove Alarm and the Stove Guard?
A. The Innohome Stove Alarm is an intelligent heat sensor that monitors the cooker top temperature and its rate of rise. The sensor sounds an alarm when the temperature exceeds safe levels, providing an alert for you to switch off the cooker as soon as possible.
The Innohome Stove Guard is made up of two parts - a heat sensor and a control unit. The heat sensor works in the same way as the Stove Alarm; however it has built-in wireless capability that sends a signal to the control unit which is connected to the cookers electricity supply. When triggered, the control unit cuts off the power to the cooker, effectively preventing a fire from igniting.
Q. How does the Innohome alarm recognise the difference between when I'm cooking and a hazard happening?
A. When first installed, the Innohome alarm needs to adjust to the installation environment and the users' cooking styles. If the sensor sounds during a normal cooking situation, press the reset button on the sensor during the pre-alarm signal. This will enable the sensor to reduce its sensitivity and learn that the situation was not hazardous.
Q. I don't have a hood above my cooker. How can I install the Innohome alarm?
A. Both the Innohome Stove Alarm and Stove Guard feature integrated magnets which allow for the sensors to be fitted to the cooker hood. In cases where there is no cooker hood, the sensors can be fitted to the wall using screws. Installation instructions are supplied with each unit.
Q. Can the Innohome Stove Guard be used with gas cookers as well as electric?
A. The Innohome Stove Guard is supplied with a junction box and cable suitable for connection to an electric cooker. Currently, the Stove Guard is only suitable for electric cookers in the UK; however the product is in the development stages for gas cooker suitability.
4 customers have rated this product and it has an overall rating of 4.8 out of 5
All our reviews are written by real customers that have purchased this product from us and are published without modification.
Reviewed by: SB
Brilliant product. Finally a solution to make sure my mum doesn't set fire to the kitchen!
Published on: 22nd April 2014
Reviewed by: KB
Brilliant idea! I bought this alarm to stop my 2 year old turning the cooker on. i had to pay a bit of money to get it fitted by my sparky but since its been fitted she cant turn the cooker on and its 1less thing i need to worry aboyut.
Published on: 16th April 2014
Reviewed by: SB
Published on: 26th March 2014
Reviewed by: AW
why has no-one though of this before. stopping the fire starting is a mauch better idea than beeping at you to tell you it has!
Published on: 11th February 2014