DorMag Pro Magnetic Fire Door Holder

Fireco ProHub

At the centre of the system is the Fireco ProHub, which remains in constant radio contact with all connected Dorgard Pro retainers and Freedor Pro free-swing closers, allowing it to monitor their battery status and alert you of any faults. An annual subscription to the InSite Site Manager cloud based remote management system gives you the ability to check the system status from anywhere. The ProHub is hardwired directly to your existing alarm panel and will send a signal to all Pro Range units wirelessly connected to the system when the fire alarm activates.

Upon receiving the signal from the ProHub the Pro Range retainers and closers will release, ensuring that your fire doors can close and prevent the spread of fire. There are two models of ProHub: 240V mains with optional backup battery, or Power over Ethernet (PoE).

Dorgard Pro Fire Door Retainer

A key component of Fireco\'s Pro Fire Door Retainer system are Dorgard Pro fire door retainers, which incorporate the latest components and technology. Available in black or white, the Dorgard Pro fire door retainer is constructed from tough and durable, impact resistant ABS plastic. Each unit is fitted with energy efficient elements, which enables the Dorgard Pro to last 1 – 2 years on a single set of batteries.

Freedor Pro Overhead Fire Door Closer

A completely wireless and battery operated free-swing fire door closer, the Freedor Pro takes the weight off and allows doors to be moved freely, and left open at any angle. This allows freedom of movement around a building for all occupants, but is especially beneficial to the mobility-impaired, children, and older people as closing a door for privacy no longer means struggling to open it again later. Available in silver, brass, gloss white, and matte black finishes.

DorMag Pro Magnetic Fire Door Holder

The newest component of Fireco\'s Pro Fire Door Retainer system, DorMag Pro units use magnetic \'hold and release\' technology to legally retain fire doors, while ensuring that they will deactivate to close the door in the event of a fire. These units rely on radio technology for emergency deactivation, preventing false activations from ambient sounds. Installation at the top of the door reduces the risk of tampering in public buildings. These units are constructed using durable ABS plastic, and can retain fire doors up to EN power size 5.

Fireco ProExtender

In a typical building the Fireco ProHub has an impressive 40-50m range, though the exact range will be influenced by the construction and function of your building. Our engineer will be able to assess the range of the transmitter within your premises, making recommendations bespoke to your requirements. The system\'s range can be increased on larger sites by adding Fireco ProExtender units. Up to 8 ProExtender units can be included in a system, with up to 64 Dorgard Pro and Freedor Pro units being interconnected into the system per ProHub / ProExtender. A maximum of 500 Pro Range retainers and closers can be connected and controlled by the system.

Installation

Once your Fireco Pro Fire Door Retainer system has been designed by our trained specialist, one of our engineering team will book a date of installation that is convenient for you. The engineer will attend your site, installing your full system and testing it thoroughly to ensure everything works as it should.

After the Fireco Pro Fire Door Retainer system is installed, there is minimal maintenance required: a simple glance at the InSite Site Manager web portal will show you the current status of your system and give you peace of mind that all connected Dorgard Pro and Freedor Pro units are powered and connected.