Fire Alarm Testing Equipment
Ensure fire detection system is fully operational with high-quality fire alarm testing equipment designed for accurate, safe and compliant testing of smoke, heat and carbon monoxide detectors. Whether you’re a fire safety engineer, facilities manager or installer, the right testing tools help verify that the fire alarm system will respond correctly in an emergency which is a key part of regulatory compliance.
Read more about fire alarm testing
Fire alarm testing equipment covers a range of specialist tools, from handheld aerosol testers for individual detectors to complete test kits with smoke and heat stimulus generators and extendable poles for inaccessible ceiling-mounted units. These devices enable functional testing that goes beyond simply pressing a detector’s manual test button, triggering the actual sensing mechanism and confirming the device reacts as intended.
Smoke Detector & Heat Detector Test Kits
Our category includes professional smoke and heat test kits such as Solo Smoke and Heat Detector Kits that allow you to introduce real test stimuli to detectors on fire alarm systems without damaging equipment or creating unwanted residue. Smoke aerosol testers provide a simple way to trigger optical or ionisation smoke detectors, while heat stimulus tools allow you to verify that thermal detectors activate at the correct temperature points.
For more advanced requirements, integrated kits such as those from the Testifire XTR2 range combine smoke and heat testing with extendable poles and connectivity features to generate automatic test reports for maintenance documentation and audits.
Extendable Poles & Remote Testing Tools
Testing detectors mounted above normal reach can be challenging and unsafe without the right kit. Fire alarm testing equipment such as telescopic poles and remote accessory tools enable safe access to ceiling-mounted detectors. This allows you to trigger and inspect devices without ladders or elevated platforms, saving time and improving safety during routine inspections.
Designed for Compliance and Professional Use
Using certified fire alarm testing equipment supports compliance with standards and best practices, helping you perform both weekly functional checks and more comprehensive half-yearly inspections as part of a fire safety maintenance regime. These tools are compatible with addressable and conventional fire alarm systems across a wide range of detector brands and types.
Browse our full range to find the right fire alarm testing equipment for your premises or job, whether you need simple aerosol sprays for spot checks or advanced test kits for professional servicing.
Solo 365 Replacement Smoke Generator
See Description...
- Designed for use only with Solo 365 equipment
- Automatically creates smoke when the Solo 365 cup is over a detector head
- On-demand, 5-second smoke cycles prevent wastage and detector contamination
- Easy to install, field-replaceable design – no manufacturer service required
£331.67 inc VAT
£276.39 ex VAT
Solo 200 - Universal Detector Removal Tool
See Description...
- For use with Solo or Testifire systems
- Single, universal tool for detector removal, inspection and replacement
- Adjustable to suit the majority of smoke, CO and heat detectors
- Tool remains parallel with the ceiling
£367.43 inc VAT
£306.19 ex VAT
Solo 332 - Large Smoke Dispenser
See Description...
- Introduces simulated smoke or CO to a detector
- Large cup makes it suitable for detectors up to 17.7cm/7" in diameter
- For use in conjunction with Solo telescopic access poles
- Suitable for functional testing of domestic alarms
£524.99 inc VAT
£437.49 ex VAT
Solo 808, 809 & 810 - Smoke Detector Testing Starter Packs
See Description...
- Ideal entry level kit for testing smoke detectors
- Available in three different working heights - 2.5m, 4m, and 6m
- Includes 150ml canister of Solo A10 smoke detector tester spray
- Non-conductive glass fibre telescopic access and extension poles
From: £515.36 inc VAT
£429.47 ex VAT
Solo 365 Field Service Pack
See Description...
- All user-replaceable Solo 365 components in one kit
- Reduce time lost due to damaged equipment
- Ideal for keeping as spares
- No manufacturer refurbishment required
£673.19 inc VAT
£560.99 ex VAT
Solo Domestic Smoke and Carbon Monoxide Alarm Tester Kit
See Description...
- Ideal kit for functional testing of domestic alarms
- Large smoke dispenser: suitable for alarms up to 17.7cm/7"
- Includes Solo A10 and C3 aerosols
- Non-conductive glass fibre extension access pole
£721.39 inc VAT
£601.16 ex VAT
Solo 423 & 424 - Mains Powered Heat Detector Testers
See Description...
- Provides a suitable heat source for effective heat detector testing
- Designed for for fixed temperature, rate-of-rise and combination detectors
- Available in two volt versions
- Supplied with a 5m / 16ft cable
From: £629.60 inc VAT
£524.67 ex VAT
Solo 460 - Cordless Heat Detector Tester - Head Unit Only
See Description...
- Replacement head unit for the Solo cordless heat detector tester
- Requires no wiring whatsoever
- Uses Cross Air Technology to test heat detectors
- Suitable for fixed temperature, rate-of-rise and combination detectors
£732.59 inc VAT
£610.49 ex VAT
Solo 365 Smoke Detector Tester Head & Key Components Kit
See Description...
- Electronic smoke detector testing system
- Non-pressurised, non-flammable smoke cartridges
- Lighter than standard Solo tester with aerosol
- Built-in 'clearing' mode disperses test gas
- LED torch for testing in poorly lit areas
£1,001.15 inc VAT
£834.29 ex VAT
Solo 461 - Cordless Heat Detector Tester Kit
See Description...
- Battery operated - 2 batteries supplied
- Air is heated and directed at the detector sensor
- Suitable for fixed temperature, rate-of-rise and combination detectors
- Supplied with a fast charger to allow for all day detector testing
£1,057.07 inc VAT
£880.89 ex VAT
Solo 908 - 4m Test Kit with Solo 365
See Description...
- Easily test smoke detectors at heights of up to 4m
- Excellent entry level kit or as an addition to existing equipment
- Supplied with battery, charger, and smoke cartridge for immediate use
- Compatible with Solo's extension and telescopic poles
£1,309.78 inc VAT
£1,091.48 ex VAT
Solo 811 & 812 - Smoke Detector Test and Removal Kits
See Description...
- Includes equipment needed for the removal and testing of smoke detectors
- Available in two different working heights - 6m and 8.2m
- Supplied with Solo A10 smoke detector tester spray
- Universal removal tool suits the majority of detectors
From: £1,573.43 inc VAT
£1,311.19 ex VAT
Solo 814 - Smoke and Heat Detector Test and Removal Kit - Mains
See Description...
- Equipment for testing and removal of smoke and heat detectors in one kit
- Includes removal tool, smoke dispenser and 220/240V mains powered heat detector tester
- Designed to suit the majority of detectors
- Only one telescopic access pole required for all three equipment heads
£2,361.83 inc VAT
£1,968.19 ex VAT
Testifire 2000 Smoke/Heat/CO Detector Tester - Head Unit
See Description...
- Replacement head unit for the Testifire multi-sensor detector testing system
- Capable of testing smoke, heat, carbon monoxide (CO) and aspirating detector heads
- Supplied with smoke capsule and CO capsule
- For use with Solo telescopic access poles
£2,306.99 inc VAT
£1,922.49 ex VAT
Solo 911 - 6m Test and Removal Kit with Solo 365
See Description...
- Easily test smoke detectors at heights of up to 6m
- Includes Solo 200 universal detector removal tool for maintenance
- Supplied with battery, charger, and smoke cartridge for immediate use
- Solo 610 protective storage and carry bag
£2,156.38 inc VAT
£1,796.98 ex VAT
Testifire 2001-001 Smoke/Heat/CO Detector Testing Kit
See Description...
- Ideal kit for functional testing of commercial smoke and co detection systems
- Supplied with 2 battery batons as standard
- Suitable for testing smoke and heat detectors
- Features automated test initiation using infra-red technology
£2,893.43 inc VAT
£2,411.19 ex VAT
Solo 822 & 823 - Smoke and Heat Detector Test and Removal Kit - Cordless
See Description...
- Includes equipment needed for detector removal and testing
- Requires no mains wiring
- Available in two different working heights - 6m and 9.3m
- Suitable for use on the majority of modern detectors
From: £2,410.00 inc VAT
£2,008.33 ex VAT
Testifire 6202 6m Smoke/Heat/CO Detector Testing Kit
See Description...
- The premium option for functional testing of commercial smoke and carbon monoxide detection systems
- Supplied with 2 battery batons
- Capable of reaching devices on ceilings of up to 6m
- Automated test initiation made possible by infra-red technology
£3,847.91 inc VAT
£3,206.59 ex VAT