SMK4896 Surface Mounting Pattress for Firex Alarms
Designed for the Kidde Firex range of mains powered smoke and heat alarms, the SMK4896 surface mounting pattress can be used where the ceiling is concrete or there is insufficient room for the cabling required for the installation of the alarm.
- Used for installations with surface cabling
- Entry holes and trunking entry ports designed for the Firex alarms only
- Suitable for use with the following smoke and heat alarms:
- Firex KF10 Ionisation Smoke Alarm with Alkaline Back Up Battery
- Firex KF10R Ionisation Smoke Alarm with Lithium Back Up Battery
- Firex KF20 Optical Smoke Alarm with Alkaline Back Up Battery
- Firex KF20R Optical Smoke Alarm with Lithium Back Up Battery
- Firex KF30 Heat Alarm with Alkaline Back Up Battery
- Firex KF30R Heat Alarm with Lithium Back Up Battery
- Warranty: 6 Years
Customer Reviews (6)
Reviews by Real Customers
All of our product reviews are written by real customers that have purchased this product from us and are published without modification.
Reviewed by
S F
Published on
17th July 2022
Reviewed by
Anonymous
Published on
15th August 2017
No problem.
Reviewed by
Anonymous
Published on
26th June 2017
Fit for purpose
Reviewed by
Anonymous
Published on
19th March 2017
Easy to install Ordered the fire alarms to replace the originals that had turned yellow with age
Reviewed by
Anonymous
Published on
19th December 2015
Inadequate terminal block The only thing wrong with these pattresses is that the terminal block supplied is too small fit the neutral conductor of the connector cable and the neutral conductor of the supply cable. 9 times out of ten they have to be forced in, a procedure which adds frustration and minutes onto what should be a simple job. Sometimes it is not then possible to do up the screw because it is fully extended and cannot be got to 'bite' the thread. The problem is probably to do with the connector cable. The neutral termination should be marginally thinner it would make all the difference. As it is, an easy job is made very difficult.
Technical Data
| Product Code | KESMK4896 |
|---|---|
| Brand | Kidde |
| Manufacturer's Part Number | SMK4896 |
| Approvals & Markings | CE Marked |
| Colour | White |
| Compatible Products | Kidde Firex Alarms |
| Equipment Type | Base |
| Material | Plastic |
| Operating Temperature | 0°C To +40°C |
| Recyclable | Not Recyclable |
| Relative Humidity | Up To 93% |
| Warranty | 6 Years |
| Dimensions (Unit) |
|
| Weight | 48g |
| Datasheets |
Perfect to replace old fitting.