230V Remote Control Switch with Test & Hush - Kidde REMTH
Temporarily Unavailable
This product is temporarily unavailable and is not currently available to buy. View similar products: Domestic CO2 Detector.
Domestic CO2 Detector
We offer a range of carbon dioxide detectors for domestic use, as well as within a classroom environment. Providing real time CO2 levels throughout your home, to improve air quality and promote healthy ventilation of your premises
This remote Test & Hush switch from Kidde allows you to carry out those functions on all interlinked alarms in the Slick and Firex range of smoke, heat and carbon monoxide alarms. The unit is mains powered and hard-wire interlinked with your system, eliminating the need to climb ladders to test or silence your alarms.
- 230V mains powered unit
- Suitable for use with Kidde Slick and Kidde Firex models
- Suitable for fitting on table tops or walls
- CE Marked
- BS 5839 Part 6 Grade D accessory (to be used with smoke and heat alarms with the appropriate bases). Provides an element of some central control as Grade C.
- Turning on the "Test" switch will activate all interlinked Smoke and Heat Alarms
- Turning off the "Test" switch will reset all of the interlinked Smoke and Heat Alarms
- Makes weekly testing quicker and easier
- The "Hush" function will send all interlinked Smoke and Heat Alarms into a state of reduced sensitivity for a period of about 10 minutes and will then automatically reset
- LED indicates transmission status
- Mounting base provided with fittings
- 5 year manufacturer's guarantee
The table below shows all the units that can interlink with the Kidde REMTH.
Alarms from the Kidde Slick series
|
Model Number
|
Type of unit
|
Type of interlink
|
| KE1SFW | Ionisation Alarm with Alkaline Battery | Wired interlink |
| KE1SFLLW | Ionisation Alarm with 10 Year Lithium Cell | Wired interlink |
| KE2SFW | Optical Alarm with Alkaline Battery | Wired interlink |
| KE2SFLLW | Optical Alarm with 10 Year Lithium Cell | Wired interlink |
| KE3SFW | Heat Alarm with Alkaline Battery | Wired interlink |
| KE3SFLLW | Heat Alarm with 10 Year Lithium Cell | Wired interlink |
Alarms from the Kidde Firex series
|
Model Number
|
Type of unit
|
Type of interlink
|
| KEKF1 | Ionisation Alarm with Alkaline Battery | Wired interlink |
| KEKF1R | Ionisation Alarm with 10 Year Lithium Cell | Wired interlink |
| KEKF2 | Optical Alarm with Alkaline Battery | Wired interlink |
| KEKF2R | Optical Alarm with 10 Year Lithium Cell | Wired interlink |
| KEKF3 | Heat Alarm with Alkaline Battery | Wired interlink |
| KEKF3R | Heat Alarm with 10 Year Lithium Cell | Wired interlink |
| Product Code | KEREMTH |
|---|---|
| Alternative Product Codes | REMTH |
| Brand | Kidde |
| Dimensions (HxWxD) | 89x89x47mm |
| Operating Temperature | 0 to 40°C |
| Power Type | 230V Mains Powered |
| Relative Humidity | Up to 93% Relative Humidity |
| Weight | 0.25kg |
Customer Reviews
1 customer has given this product an overall rating of 1 out of 5
Reviews by real customers
All of our product reviews are written by real customers that have purchased this product from us and are published without modification.Rating: 1 / 5 Stars
Reviewed by:
flimsy electrical connection points The three screw in connection points are pin soldered to the circuit board. Unless you connected very carefully the act of pushing the front into the patress will rip the connection off the circuit board
Published on: 26th November 2015
Looking for more information?
If you have any questions or would like more information about this product you can ask one of our specialists.
Live Chat Available Now