The BRKEOL Easichange® is the replacement for the DETA 1151 and 1153 smoke alarms. The kit contains a BRK 660MRL alarm head, sealed lithium battery, quick replacement guide, FREE Easichange® tool and full product manual. Also included is a reminder sticker to put on your fuse box so you know when to replace the alarm.
As an upgrade to the DETA 1151 and 1153 that it replaces, this BRKEOL Easichange mains powered smoke alarm is fitted with a sealed lithium backup battery that will not need changing for the full lifespan of the alarm. Utilising an optical smoke sensor means these alarms are less likely to suffer false alarms than older ionisation smoke sensors, while also improving detection of slow smouldering fires. As it fits on the same base plate there is no need to rewire the connection and no need to call an electrician, making it a quick and easy process to replace and old DETA alarm.
The simple installation process of the Easichange® replacement kits negates the need for an electrician, though you must ensure that mains power to all interlinked alarms is cut before beginning work. The interlink wire can carry a live electric current between alarms if they are powered from different circuits.
Below is a table of all alarms which can be interchanged using the same base plate and interlink system. Care should be taken to ensure the correct model is purchased to replace existing alarms. Optical smoke alarms can be used in place of ionisation smoke alarms, but heat alarms and smoke alarms serve different purposes and cannot be swapped.
|Original Model||Type of Alarm||Replacement Model|
|BRK 660MBX||Optical Smoke Alarm with Alkaline Battery and Twist Base||BRKEOA|
|BRK 670MBX||Ionisation Smoke Alarm with Alkaline Battery and Twist Base||BRKEOA|
|BRK 690MBX||Heat Alarm with Alkaline Battery and Twist Base||BRKEHA|
|BRK 660MRL||Optical Smoke Alarm with Lithium Battery and Twist Base||BRKEOL|
|BRK 670MRL||Ionisation Smoke Alarm with Lithium Battery and Twist Base||BRKEOL|
|BRK 690MRL||Heat Alarm with Alkaline Lithium and Twist Base||BRKEHL|
|BRK 760MBX||Optical Smoke Alarm with Alkaline Battery and Push Base||BRKEOL|
|BRK 770MBX||Ionisation Smoke Alarm with Alkaline Battery and Push Base||BRKEOL|
|BRK 790MBX||Heat Alarm with Alkaline Battery and Push Base||BRKEHL|
|BRK 760MRL||Optical Smoke Alarm with Lithium Battery and Push Base||BRKEOL|
|BRK 770MRL||Ionisation Smoke Alarm with Lithium Battery and Push Base||BRKEOL|
|BRK 790MRL||Heat Alarm with Alkaline Lithium and Push Base||BRKEHL|
|DETA 1111||Ionisation Smoke Alarm with Alkaline Battery and Twist Base||BRKEOA|
|DETA 1113||Optical Smoke Alarm with Alkaline Battery and Twist Base||BRKEOA|
|DETA 1115||Heat Alarm with Alkaline Battery and Twist Base||BRKEHA|
|DETA 1151||Ionisation Smoke Alarm with Alkaline Battery and Push Base||BRKEOL|
|DETA 1153||Optical Smoke Alarm with Alkaline Battery and Push Base||BRKEOL|
|DETA 1155||Heat Alarm with Alkaline Battery and Push Base||BRKEHL|
This is the technical data for the Easichange® Replacement Smoke Alarm for DETA 1151 and DETA 1153.
|Alternative Product Codes||DETA1151, DETA1153, 1151, 1153, BRKEOL|
|Sound Output||85dB at 3 metres|
|Back-Up Battery||Sealed non-replaceable lithium|
|Operating Temperature||+5 °C to +38 °C|
|Relative Humidity||10% to 85%|
The following datasheets are available for this product.
|Product Code: DTEPAS||
More than 20 in stock Expected dispatch: Tomorrow
£25.55 inc VAT
£21.29 ex VAT