Dorgard Pro Fire Door Retainer System

Fireco Transmitter

At the center of the system is the Fireco Transmitter that remains in constant radio contact with all connected Dorgard Pro retainers, allowing it to monitor their battery status and alert you of any faults. The simple LED indicators on the front of the unit give you the ability to check the system status at a glance. The Transmitter can be either hardwired directly to your existing alarm panel, or installed in acoustic mode close to one of the fire alarm sounders if your alarm panel does not have an appropriate relay output. In either configuration the Transmitter will send a signal to all Dorgard Pro units wirelessly connected to the system when the fire alarm sounds. Upon receiving the signal from the Transmitter the Dorgard Pro retainers will release, ensuring that your fire doors can close and prevent the spread of fire.

Fireco Repeater

In the open the Fireco Transmitter has an impressive 300m range, within a building the range is determined by such factors as the type and construction of your building. Our engineer will assess the range of the transmitter within your particular setting, making recommendations bespoke to your requirements. The system’s range can be increased on larger sites by adding Fireco Repeater units. Up to 50 Repeater units can be included in a system, with up to 120 Dorgard Pro door retainers being interconnected into the system per Transmitter/Repeater. A maximum of 500 Dorgard Pro retainers can be connected and controlled by the system.

Dorgard Pro

Completing your system are the Dorgard Pro fire door retainers, which incorporate the latest components and technology. The Dordard Pro fire door retainer is constructed from tough and durable, impact resistant ABS plastic and is fitted with energy efficient elements, which enables the Dorgard Pro to last a full 5 years on a single set of batteries.

Installation

Once your Dorgard Pro system has been designed by our trained specialist, one of our engineering team will book a date of installation that is convenient for you. The engineer will attend your site, installing your Dorgard Pro system and testing it thoroughly to ensure everything works as it should.

After the Dorgard Pro system is installed there is minimal maintenance required: a simple glance at the Transmitter indicator LEDs will show you the current status of your system and give you peace of mind that all connected Dorgard Pro units are powered and connected.