Dorgard Fire Door Retainers

Wedging fire doors open is not just dangerous, it is illegal. The Dorgard fire door retainer is a safe and legal solution that will automatically release the fire door on the sound of your fire alarm. Every Dorgard contains an acoustic sensor that continuously 'listens' for the sound of your fire alarm. It is fitted with a "fail safe" mechanism: power is required to hold the plunger down, so it will not hold your fire door open when the batteries run flat!

Made from durable plastics and designed for longevity, the Dorgard is fitted to the bottom of a fire door and operated by foot. To hold the door open simply push the plunger down, and tap it just under the top to release.

4.8 out of 5 stars
1+ units 5+ units 10+ units

£81.79 ex VAT

£98.15 inc VAT

£78.29 ex VAT

£93.95 inc VAT

£77.79 ex VAT

£93.35 inc VAT

£81.79 ex VAT

£98.15 inc VAT

£78.29 ex VAT

£93.95 inc VAT

£77.79 ex VAT

£93.35 inc VAT

£81.79 ex VAT

£98.15 inc VAT

£78.29 ex VAT

£93.95 inc VAT

£77.79 ex VAT

£93.35 inc VAT

Safe & Legal

Wedging open a fire door is illegal and aids the spread of fire. The Dorgard has been designed, tested, and certified to release during a fire alarm or fault, making it both safe and legal.

Workplace Convenience

Heavy fire doors can hinder people moving around a building. Dorgard enables easy movement through a building, especially when carrying or moving equipment.

Certified

Dorgard is a "Standard" category device under BS 7273-4 with testing & certification to BS EN 1155 and BS EN 1634. Quality and performance are guaranteed with a Dorgard.

Stopping Power

Dorgard provides ultimate stopping power against doors & door closers, capable of holding EN 7 doors up to 1600mm wide and 160kg in weight with fire ratings of 120 minutes.

No Wiring Needed

The Dorgard is battery powered and has an acoustic sensor to listen for an active fire alarm, so there's no need to worry about cables to the fire alarm panel or power supply.

Aiding Independence

Dorgard helps people maintain independence by keeping heavy fire doors open throughout the premises. Ideal for patients in care homes and hospitals as well as young children in schools.

  • Night-time Release
  • Fail Safe
  • Strong Construction
  • Easy Installation
Night-time Release

It is recommended that all fire doors are closed at night so that any fires which occur while the building is unoccupied are contained, and are not allowed to spread unnoticed. Dorgard has a night-time release feature which can be set to any time, making it suitable for any schedule. After releasing at the pre-set time, the Dorgard will not operate as a hold open device until the following morning.

Fail Safe

The Dorgard has been designed for complete safety and will "fail safe" in the event of a fault or flat battery. The mechanism which holds the plunger down, to resist the closing force on a door, requires power to remain active. This means that the Dorgard simply will not work if there is no power or a fault in the mechanism, ensuring that the fire door will be closed by default in order to block the spread of fire.

Strong Construction

Since the Dorgard is installed at floor level and operated by the user’s foot, a certain amount of knocks are expected. To ensure it can withstand this environment, the Dorgard is designed & built with highly durable components that have been thoroughly tested to ensure longevity. Dorgard is also certified to BS EN 1634 regarding fire resistance and smoke control tests for door assemblies and hardware.

Easy Installation

Installing a Dorgard is quick and easy, and requires only 4 standard screws (supplied) for fixing to the fire door. Simply mark up the door using the provided template, fix the Dorgard in place using the provided fixings pack, and insert the battery. After installation the night-time release can be set according to the User Guide. With a few basic tools, almost anyone can install a Dorgard in less than 5 minutes.

Pricing & Availability

Model Stock 1+ units 5+ units 10+ units
Black
Product Code: FCDG01BK
Stock Level:
More than 20 in stock Expected dispatch: Tomorrow
1+ units

£81.79 ex VAT

£98.15 inc VAT

5+ units

£78.29 ex VAT

£93.95 inc VAT

10+ units

£77.79 ex VAT

£93.35 inc VAT

Red
Product Code: FCDG01RD
Stock Level:
More than 20 in stock Expected dispatch: Tomorrow
1+ units

£81.79 ex VAT

£98.15 inc VAT

5+ units

£78.29 ex VAT

£93.95 inc VAT

10+ units

£77.79 ex VAT

£93.35 inc VAT

White
Product Code: FCDG01WH
Stock Level:
More than 20 in stock Expected dispatch: Tomorrow
1+ units

£81.79 ex VAT

£98.15 inc VAT

5+ units

£78.29 ex VAT

£93.95 inc VAT

10+ units

£77.79 ex VAT

£93.35 inc VAT

Customer Reviews

186 customers have given this product an overall rating of 4.8 out of 5

Reviews by real customers

All of our product reviews are written by real customers that have purchased this product from us and are published without modification.

Rating: 5 / 5 Stars

Reviewed by: A B

Great product. Issue with the first Dorgard delivered. Safelincs were quick in responding and replacing the product. Thank you !

Published on: 5th July 2021

Rating: 5 / 5 Stars

Reviewed by: K M

Neat and easy to install, works well

Published on: 28th May 2021

Show More

Dorgard Spares and Accessories

Dorgard Replacement Feet (Pack of 5)

These rubber feet for Dorgard units are designed as replacements for existing feet, which the manufacturer recommends every 12 months. As the Dorgard units are used under normal conditions the rubber feet begin to lose their original texture which provides the grip to keep doors open when in operation. Forcefully pulling a retained door to close it, instead of disengaging the Dorgard, will wear down the feet more quickly than under normal conditions, and different flooring materials will affect the feet at different rates.

  • Sold in packs of 5
  • Improve the life of your Dorgard feet by releasing the plunger properly when closing the door
  • Replacement feet supplied in grey
  • Recommended to be replaced every 12 months

£9.49 inc VAT

£11.39 ex VAT

View Product

Replacement Floor Plate for Dorgard Fire Door Retainers

The replacement floor plate kit for Dorgard is ideal if the original floor plate gets damaged, lost, or cannot be moved from the point at which it is fixed. The kit contains a full sized floor plate fitted with a bump stop, as well as a small floor plate without bump stop. Also included in the kit is a replacement rubber foot for the Dorgard unit. These kits are supplied complete with fixing screws and rawl plugs.

  • FREE shipping on this product
  • Supplied with fixing screws
  • Includes two types of floor plate:
    • Full size with bump-stop
    • Half size without bump-stop
  • Helps prevent damage to flooring when the Dorgard is engaged
  • Also includes replacement rubber foot for the Dorgard

£14.69 inc VAT

£17.63 ex VAT

View Product

Dorgard Adapter Plate for Steel Doors

The Dorgard is an essential fire safety device which allows you to keep fire doors open legally throughout your premises. The Dorgard has previously been restricted for use on wooden doors only; however, with the new Dorgard adapter plate, the audio activated fire door retainer can now be used on steel doors. The adapter plate is discretely fitted between the door and the retainer, making it virtually unnoticeable when the Dorgard has been installed. The plate has self adhesive backing which negates the need for fixing screws to attach it to the door.

  • Enables the Dorgard fire door retainer to be used on steel doors
  • Easy to install with clear fitting instructions
  • Black finish as standard
  • Fixed discretely between the door and the back of the retainer
  • Self-adhesive backing
  • For use in conjunction with the Dorgard fire door retainer

£16.39 inc VAT

£19.67 ex VAT

View Product

Brushed Stainless Steel Cover for Dorgard Fire Door Retainers

Ideal for prestigious installations such as offices, hotels and conference centres, these brushed stainless steel covers for Dorgard Fire Door Retainers protect the units from knocks and scratches whilst helping to make the Dorgard's appearance more appealing.

  • Stylish metal covers for the Dorgard Fire Door Retainer
  • Available with a brushed stainless steel finish
  • Designed to enhance the appearance of the Dorgard to help complement the interior of your building
  • Easy to install
  • Supplied with fixings, fitting instructions and a cleaning wipe
  • Protects the door retainer from knocks and scratches to prolong life
  • Ideal for modern offices, hotels, restaurants, etc.

£19.99 inc VAT

£23.99 ex VAT

View Product
  • Stopper / Ferrule
  • Floor Plates
  • Steel Door Adapter
  • Stainless Steel Cover