CALL OUR TEAM NOW 0800 612 6537 Lines open today 8am - 6pm

Mains Radio-Interlinked Combined Optical Smoke & Heat Alarm with Self-Charging 10 Year Back-up - Aico Ei2110eRF

Discontinued Product

This product has been discontinued.

alternative product

Mains Radio-Interlinked Smoke and Heat Alarm with Back-up - Ei3024RF

  • Power: 230V mains powered with back-up battery
  • Backup Battery: Self-charging battery
    • Warranty: 5 year warranty
    • Combined alarm: both an optical smoke, and heat sensor
    • Hybrid interlinking with up to 12 compatible devices
    • AudioLINK - extract real time data to your smart phone
    • Kitemarked to BS EN 14604: 2005 (smoke)
    • Kitemarked to BS 5446-2: 2003 (heat)
    • Also suitable for both the Welsh and Scottish 2022 legislation

    £120.94 inc VAT

    £100.78 ex VAT

    View Product
    Product Overview

    This alarm is the radio-interlinked version of the Ei2110e, a multi-sensor fire alarm that contains two separate sensing elements – optical and heat. As the unit monitors two different by-products of fires (smoke and temperature), its response to all types of fire is vastly improved over traditional single sensor alarms and reduces the number of false alarms in the premises.

    • Power: 230V mains powered with back-up battery
    • Backup Battery: Self-charging lithium battery
    • Warranty: 5 year warranty
    • Kitemarked to BS EN 14604: 2005 and CE marked
    • Suitable for installations complying to BS 5839-6: 2019 Grade D1
    • Each unit consists of a radio-frequency module and the Ei2110e alarm sensor
    • Suitable for living rooms, bedrooms, hallway, landings (not kitchen or garage)
    • Requires no cables between units
    • Can be powered from the nearest light fitting
    • A maximum of 12 alarms can be interlinked
    • Supplied RadioLINK module simply plugs into the back of the alarm
    • Built-in radioLINK repeater function allows for the RF signal to work around obstructions
    • RF range: 150 metres in free space and up to 30 metres in buildings
    • Alarms that can also be interlinked with include:
      - Ei161eRF, EI164eRF, Ei166eRF
    • Provides low battery warning and features a test/hush button facility
    • Unique dust compensation feature (the alarm automatically adjusts for any contamination within the optical sensor chamber)
    • Supplied with fixings; 2 x screws and 2 x rawl plugs
    • This alarm is also suitable for the updated 2022 Scottish legislation for fire alarms in homes

    Please Note: These units use the radio-interlink frequency 868.499MHz. This bandwidth is restricted for safety products, therefore the chances of interference should be limited.

    Interlink

    The table below shows all the units that can interlink with the EI2110ERF.

    Smoke and Heat Alarms - Radio

    Model Number
    Type of Unit
    Type of Interlink
    Ei3014 / Ei3014RF Mains Powered Heat Alarm - Sealed Lithium Hardwire or Radio Interlink
    Ei3016 / Ei3016RF Mains Powered Optical Smoke Alarm - Sealed Lithium Hardwire or Radio Interlink
    Ei3024 / Ei3024RF Mains Powered Optical & Heat Alarm - Sealed Lithium Hardwire or Radio Interlink
    Ei3028 / Ei3028RF Mains Powered Heat & Carbon Monoxide Alarm - Sealed Lithium Hardwire or Radio Interlink
    Ei2110e / Ei2110eRF Mains Powered Multi Sensor Smoke & Heat Alarm - Sealed Lithium Hardwire or Radio Interlink
    Ei161e / Ei161eRF Mains Powered Ionisation Smoke Alarm - Sealed Lithium Hardwire or Radio Interlink
    Ei164e / Ei164eRF Mains Powered Heat Alarm - Sealed Lithium Hardwire or Radio Interlink
    Ei166e / Ei166eRF Mains Powered Optical Smoke Alarm - Sealed Lithium Hardwire or Radio Interlink
    Ei141 / Ei168RC141RC Mains Powered Ionisation Alarm - 9V Alkaline Hardwire or Radio Interlink
    Ei144 / Ei168RC144RC Mains Powered Heat Alarm - 9V Alkaline Hardwire or Radio Interlink
    Ei146 / Ei168RC146RC Mains Powered Optical Smoke Alarm - 9V Alkaline Hardwire or Radio Interlink
    Ei3100RF Battery Powered Ionisation Smoke Alarm - 9V Alkaline Radio Interlink
    Ei3103RF Battery Powered Heat Alarm - 9V Alkaline Radio Interlink
    Ei3105RF Battery Powered Optical Smoke Alarm - 9V Alkaline Radio Interlink
    Ei603RF Battery Powered Heat Alarm - Sealed Lithium Radio Interlink
    Ei650RF Battery Powered Optical Smoke Alarm - Sealed Lithium Radio Interlink

    Carbon Monoxide Alarms

    Model Number
    Type of unit
    Type of interlink
    Ei3018 / Ei3018RF Mains Powered Carbon Monoxide Alarm - Sealed Lithium Hardwire or Radio Interlink
    Ei3028 / Ei3028RF Mains Powered Heat & Carbon Monoxide Alarm - Sealed Lithium Hardwire or Radio Interlink
    Ei262 Mains Powered Carbon Monoxide Alarm - Sealed Lithium Hardwire or Radio Interlink
    Ei261 Mains Powered Carbon Monoxide Alarm - Sealed Lithium Hardwire Interlink
    Ei208WRF Battery Powered Carbon Monoxide Detector - Sealed Lithium Radio Iinterlink

    Ancillary Products

    Model Number
    Type of unit
    Type of interlink
    Ei170RF Mains Powered Strobe and Vibration Pad for the Hearing Impaired - Sealed Lithium Radio Interlink
    Ei407 Battery Powered Manual Call Point - Sealed Lithium Radio Interlink
    MCP401RC Mains Powered Manual Call Point Hardwire Interlink
    Ei450 Battery Powered Fire and CO Alarm Controller - Sealed Lithium Radio Interlink
    Ei411H Battery Powered Locate, Silence & Test Control Switch - Sealed Lithium Radio Interlink
    Ei410TRF Battery Powered Test Remote - Sealed Lithium Radio Interlink (Ei3100RF Series)
    Ei1529RC Mains Powered Locate, Silence & Test Control Switch Hardwire Interlink
    Ei159 Mains Powered Smoke Alarm Locator Switch Hardware Interlink
    Ei428 Mains Powered 5A Relay Module Radio Interlink
    Ei128R Mains Powered 5A Relay Module Hardwire Interlink
    Ei128RBU Mains Powered 5A Relay Module with Lithium Backup Battery Hardwire Interlink
    Y03 Mains Powered Multi Frequency Sounder Hardwire Interlink (via relay)
    SAB300C Mains Powered Flashing Xenon Strobe (Clear) Hardwire Interlink (via relay)
    SAB300R Mains Powered Flashing Xenon Strobe (Red) Hardwire Interlink (via relay)

    Wiring Explained

    Mains powered Ei Electronics smoke and heat alarms require a 230V AC power supply and up to 12 alarms can be hardwire interlinked in one system.

    To obtain a mains power supply, each alarm can be connected to the nearest lighting circuit using 2 core and earth cable with a separate, dedicated interlink cable connecting alarms where applicable. However, if possible it is recommended that any alarms connected via interlink cable are all powered from a dedicated circuit from the distribution board using 3 core and earth cable for safety during maintenance, as the interlink cable will carry power from live alarms on other power circuits. Please see the diagram below:-

    Wiring Mains Powered Alarms

    Technical Data
    Product Code EI2110ERF
    Alternative Product Codes Ei2110, Ei2110e, Ei2110eRF
    Brand EI Electronics
    Back-Up Battery

    Self-Charging Lithium

    Dimensions (HxDia)

    152x50mm

    Operating Temperature

    0°C to 40°C

    Relative Humidity

    15% to 95%

    Sound Output

    85dB

    Warranty

    5 Years

    Weight 0.32kg
    Product Datasheets
    FAQs (4)
    Q. Does the Ei2110 multi sensor model need to be fitted by a qualified electrician?
    A.

    We would always recommend a qualified electrician to fit these mains powered smoke alarms for you .

    Q. Does this alarm conform to BS 5446 part 1 as recommended by the Fire Service?
    A.

    BS 5446-1:2000 was withdrawn in 2008 and replaced by BS EN 14604:2005 to conform with European standards. All of our alarms containing a smoke detector (smoke only, smoke & heat, smoke & CO) are fully compliant with BS EN 14604:2005. They also comply with any other relevant standards relating to their other detection capabilities.

    Q. What sort of smoke alarm system would I need to install for a HMO?
    A.

    BS 5839-6 recommends that one or two storey HMOs with an individual floor area of no more than 200sqm (not the total of both floors) should have a Grade D smoke alarm system installed. Grade D refers to mains powered smoke alarms with a back up battery power supply. The alarms can be interlinked either by wire or by radio signal and the system does not require a separate fire alarm panel. For HMOs of 3 storey or higher, a Grade A panel system would need to be installed. This can cover the whole of the building, or can be used just for the communal areas with a separate Grade D system installed for the individual dwellings. For both applications, the level of cover should be a minimum of LD3 (in all escape routes) but this may change according to the fire risk assessment.

    Q. For mains powered Aico smoke and heat alarms, when the electricity supply fails and the back up battery takes over, please can you tell me how long the battery will last in this situation?
    A.

    For mains powered Aico alarms with a new, fully charged lithium back up battery, the battery would last approx. 3-6 months without a mains supply. For mains powered Aico alarms with a standard alkaline back up battery, the battery would last up to a year without mains supply. If the alarm has been installed with an Ei168RC radio frequency base, please note that the Ei168RC back up battery would last approx 2 months if the power fails.

    Looking for more information?

    If you have any questions or would like more information about this product you can ask one of our specialists.

    Live Chat Available Now
    Direct Telephone 01507 464181

    Settings

    Colour Scheme

    Light
    Dark

    Pricing Display

    Inc VAT
    Ex VAT

    Cookies

    By continuing to browse this site you agree to the use of cookies.