Letterbox Blanking Plates - Letterblox™
Letterbox blanking plates protect letterboxes against arson and vandalism while premises are unoccupied, eg during holidays or in between tenants in the case of let properties. Our easily fitted and removed blanking plates work with most letterbox apertures. Constructed from solid steel they are secured in place by internally accessed handwheels. Letterblox™ lockable letterplate coverings are an insurance requirement for rented properties when they are left unoccupied.
- Protects property from vandalism and arson attack while unoccupied
- Designed to fit the majority of door types and letter plate openings
- No tools or fixings required for installation
- 2 year manufacturer's warranty
- Tested to BS EN 13724
- Ideal for use on unoccupied properties
- Re-usable so can be used again and again
Please note: The uPVC door is for illustration purposes only.
Customer Reviews (0)
Reviews by Real Customers
To make sure that all our reviews are real and accurate, we only allow customers that have purchased this product from us to write reviews.
No Reviews Available
No reviews have been written for this product yet.
If you have purchased this product from us and would like to write a review about it please complete the product review from. Please Note: to ensure the accuracy of our reviews you will need to provide a valid order number to leave a review.
Review this product nowTechnical Data
| Product Code | DERLTRBLOX |
|---|---|
| Brand | Letterblox |
| Colour | White |
| Environmental Suitability | Commercial Premises |
| Residential | |
| Finish | Powder Coated |
| Material | Steel |
| Recyclable | Fully Recyclable |
| Security Features | Blanking Plate |
| Warranty | 2 Years |
| Dimensions (Unit) |
|
| Weight | 3.00kg |
Installation Instructions
Installation Step 1
Carefully remove your existing letter plate from the door you wish to fit the Letterblox to. Place your removed letter plate and all fixings into the supplied ziplock bag to ensure all components are kept together and are easily accessible should you wish to refit your original letter plate in the future.
Installation Step 2
Use the supplied sizing gauge to determine the thickness of your door and select the corresponding components from the Letterblox kit to ensure that a secure fit can be achieved.
Installation Step 3
Place the exterior plate into the external letterbox aperture (so the protruding section is facing inwards). The foam gasket can then be fitted over the protruding section as this will help to hold the plate in place when fitting the interior plate.
Installation Step 4
Place the interior plate over the internal letterbox opening and connect both plates using the knobs and spacers selected in Step 2. Loosely screw the handwheels into place so that both plates are held together.
Installation Step 5
Ensure the Letterblox™ is straight and tighten the knobs to ensure that both plates are fixed against the door and are providing a secure seal. If the fitment is too loose / tight, try a different combination of handwheels / spacers until the desired fitment is achieved.
Contents
The Letterblox™ Kit has been designed to fit most letterbox apertures. Contents list:
- External Steel Plate
- Internal Steel Plate
- 2 x 30mm Handwheels
- 2 x 50mm Handwheels
- 2 x 70mm Handwheels
- 6 x Spacing Washers
- Foam Gasket
- Sizing Gauge
- Magnetic Letterblox Sign
- Instruction Sheet
- Ziplock Bag
