Infrared and Ultraviolet flame detectors are used in areas where traditional
smoke detectors would be prone to false alarms.
Infrared beam smoke detectors
are used to provide "wide area" smoke
detection. They are usually used in situations where it is impractical
or not cost effective (due to wiring and maintenance costs) to use traditional
point type detectors. Infrared beam detectors are also ideally suited for environments
that experience temperature extremes or buildings with high ceilings or large
open
areas such as warehouses, hangers, shopping centres, airports, sports and leisure
centres.
The FireRay 2000 conventional infrared optical beam smoke detector provides economical and effective protection of large, open plan spaces such as warehouses, factories, shopping centres, leisure centres and industrial premises. The FireRay 2000 can be connected to a zone of a conventional fire alarm control panel or interfaced with an analogue-addressable system.
Separate transmitter and receiver units
Coverage 10 - 100m
Adjustable sensitivity levels
Ground level control unit
Automatic self check drift compensation: The system monitors long term degradation due to build up of dirt on the optical surfaces
The FireRay 5000 is a motorised auto aligning infrared optical beam smoke detector. This innovative system has been designed using pioneering technology and is ideally suited for the protection of large areas where the use of traditional detection technologies would prove to be difficult and/or costly to install. The FireRay 5000 can be connected to a zone of a conventional fire alarm control panel or interfaced with an analogue-addressable system.
Combined transmitter and receiver (transceiver)
Ground level system controller
Integral laser alignment aid
Automatic contamination and building shift compensation: The beam will automatically be realigned to compensate for contamination and gradual building shift
AutOptimise beam alignment: After the laser has been used to coarsely align the beam the system will take over to automatically align it to its optimum position
Available in 2 versions: - 50M: For a coverage of up to 50M - 100M: For a coverage of 100M
3 year warranty
Cost effective solution
Quick and simple to install
Approved by LPCB and the Construction Products Directive
The FireRay F50R/F100R series conventional infrared optical beam smoke detectors provide economical and effective protection of large, open plan spaces where the use of traditional detection technologies would prove to be difficult and/or costly to install. The FireRay F50R/F100R can be connected to a zone of a conventional fire alarm control panel or interfaced with an analogue-addressable system.
Combined transmitter and receiver (transceiver)
Available in 2 versions: - F50R: For a coverage of 5 - 50M - F100R: For a coverage of 50 - 100M
12-24V D.C operating voltage
3 sensitivity levels: 25%, 35% and 50% these can be changed to suit the environment
Automatic self check drift compensation: The system monitors long term degradation due to build up of dirt on the optical surfaces
