• Radio-interlinks with other alarms (smoke and CO) from our radio-interlinked range
• 230V alarm with tamper-proof rechargeable Lithium battery back-up
• Memory feature records if CO has been detected
• The Ei262 uses a high performance electrochemical sensor to detect CO presence.  The sensor can be replaced after 5 years to provide a combined 10 year protection against CO gas.
• When in alarm mode, the Ei262 will send an alarm signal to all other radio-interlinked smoke, heat and CO alarms with the same house codes.
• Easy to use test/hush button
• Distinctive alarm sound 85dB(A) with modulated sound output to distinguish from a smoke alarm
• 50 ppm sensitivity
• Pre-alarm warning LED flashes at 50 parts per million
• Power, alarm and fault indicator lights
• Kitemarked to BS EN 50291:2001 and CE certified
• Dimensions (HxWxD): 126x150x42mm
• 5 Year Warranty (limited)
• 5year sensor lifespan
• Download the Datasheet

This is the technical data for the Radio-interlinked Mains Powered CO Alarm Ei262.

Technical Data Sheets

The following technical data sheets are available for this product:

• EI262-Datasheet
• EI262-User-Manual

Q.I need information on carbon monoxide detectors with strobe capability that can be interlinked (direct wire or wireless) to activate a strobe and indicator lights in multiple rooms separated by concrete walls.

A.The carbon monoxide alarm that you would require is the Ei262 mains powered radio link alarm. This alarm will link with the Ei170RF strobe by radio frequency (wireless).