In order for a CO alarm to activate the sensor must detect CO gas for up to 3 minutes at a given level (eg 300 ppm).
It is therefore necessary to maintain the level of test gas at the sensor for up to three minutes.
The Detectagas test kit includes a patented surround and seal system which is placed around the detector to facilitate this test.
Simply spraying a test gas at the detector will not provide a true test.
The Detectagas test method is unique and subject to four patents and design registration.
The test typically takes 2 -3 minutes to activate an alarm.
The Detectagas kit is self contained and does not require any additional equipment.
Detectagas CO Alarm Tester
This product is new!
To test CO alarms, you normally press the TEST button on the unit to ensure that the electronic circuits are working. However, to determine if the actual detection sensor is working, you can use this CO spray tester, which exposes the sensor to CO gas.
Simple and easy solution to testing CO alarms
Entirely safe
Includes all kit components (Spray, nozzle and alarm cover)
