The table below shows all the units that can interconnect with the EI103C.Compatible Alarms
Type of unit
Type of interconnection
|Ei100CNP||Ionisation Alarm||Hard wire interconnect|
|Ei103C||Heat Alarm||Hard wire interconnect|
|Ei105C||Optical Alarm||Hard wire interconnect|
|Ei100TYC||Ionisation Smoke Alarm with 10yr Battery||Hard wire interconnect|
|Ei3105TYC||Optical Smoke Alarm with 10yr Battery||Hard wire interconnect|
This is the technical data for the 9V Interconnectable Heat Alarm - Ei103C.
|Back-Up Battery||9V Alkaline|
|Sound Output||85dB (minimum) at 3m|
|Temperature Range||0 to 40°C|
|Humidity Range||0% to 90% Relative Humidity|
The following technical data sheets are available for this product:
Q. Does this alarm conform to BS 5446 part 1 as recommended by the Fire Service?
A. This recommendation has been superseded by BS 14604:2005. All of our smoke and heat alarms conform to this standard in accordance with the Kitemark.
Q. Is it possible to connect two smoke detectors Ei100CNP and a heat detector Ei103C using bell wire?
A. Yes, it is possible to connect the alarms using bell wire.
Q. How can we test the alarm to make sure it is working?
A. The manufacturer's recommendation is to test the alarm by pressing the test button. This will simulate a heat input at the heat sensor. You can also test it with a hair dryer but make sure that the hairdryer is kept away at a suitable distance from the alarm. Do not attempt to test the alarm by using open fire or excessive heat as this may damage the unit.
|Product Code: EI103C||
£22.59 ex VAT
£27.11 inc VAT
14 customers have rated this product and it has an overall rating of 4.6 out of 5
Reviewed by: RB
Easy to fit and link to other devices (smoke alarms).
Published on: 22nd June 2016
Reviewed by: JN
It works. Went of once in the kitchen so O.K. Did see a (gimic) product that allowed you to shout at the alarm to turn itself off. Think this is a good idea.
Published on: 27th September 2015
Reviewed by: RD
Easy install, neat appearance, excellent price.
Published on: 1st August 2015
Reviewed by: TM
easy to fit ,instructions satisfactory and ested okay.
Published on: 2nd January 2015
Reviewed by: -
5 stars for construction, looks and performance. Sturdily built and looks very good in place. Passed all tests. The back plate of the unit has one hole for the interconnection wire and not a lot of room for drilling another so I wasn't able to replace my units without filling twelve screw holes and repainting six patches on my ceilings. There is a label which has to be pierced in order to slip the wires for interconnection through. The label very easily rips, don't rely upon it to keep out any dust or debris from a hole in a plaster ceiling that your wire pokes through.
Published on: 1st September 2010